15MnV无缝钢管低温焊接试验总结

来源 :焊接 | 被引量 : 0次 | 上传用户:nilly
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
在伟大的毛泽东思想的光辉指引下,在无产阶级文化大革命取得伟大胜利的凯歌声中,几年来,我国钢铁工业有了很大的发展,结合我国资源情况,增加了不少的品种,并且有许多新的钢种已成功地应用于工农业的各个方面。15MnV 钢就是我国新创造的一种新型低合金钢之一。电力系统的有关部门,为了紧密配合我国的钢铁革命,大胆地提出了以15MnV 钢代替20号钢,用于电站的大型锅炉的安装工怍,尤其是在东北地区,常常是在零下20~30℃的条件下进行的。因此这种钢材在这样的低温条件下焊接,会产生什么样的效果?对焊缝有何影响?焊缝的性能如何?等等,都不清楚。为此,我们对这种钢材的无缝钢管在低温条件下进行了一系列的焊接试验,现将试验情况介绍如下: Under the brilliant guidance of the great Mao Tsetung Thought and in the triumphant triumphant song of the great proletarian cultural revolution, in the past few years, the steel industry in our country has undergone tremendous development. In light of the resources of our country, many varieties have been added and there are Many new steel grades have been successfully used in all aspects of industry and agriculture. 15MnV steel is one of the new low alloy steel newly created in our country. Relevant departments of the power system, in order to closely cooperate with the steel revolution in our country, boldly proposed the installation of large-scale boilers with 15MnV steel instead of 20 steel for power station construction workers, especially in the northeast region, often at minus 20 to 30 ℃ under the conditions of. Therefore, it is unclear what kind of effect this kind of steel will be welded under such low temperature conditions, how it affects the weld, how the performance of the weld, and so on. To this end, we conducted a series of welding tests on the seamless steel tubes of this kind of steel at low temperature. The test conditions are as follows:
其他文献
由于我国工业的迅速发展,要求工业各领域广泛地采用自动焊和半自动焊。同时由于技术不断地进展,对产品质量要求更为严格,从而对焊缝质量要求更高。小口径容器,由于内径较小
曲轴是机械压力机上的一个重要零件。关于它的应力和位移的计算,至今还没有比较完善的方法。用简支梁法计算出的应力比实测的应力大50%左右[3]。用弹性基础梁法计算得出的应
2201 C—021花键轴是汽车传动轴上传送扭矩的主要零件。要求花键部份有较好的耐磨性和较高的抗扭强度。一汽30—2203020花键轴采用调质热处理。零件在推杆式连续加热炉中进
本文浅谈了联锁块路面技术在北方地区路面施工的应用。 This article talked about the application of interlocking block pavement technology in pavement construction
用一废钻头杆焊上一块硬质合金(附图)。按图刃磨好即可钻孔。打孔时不要一次打通,以免把对面出口崩裂成喇叭口,以至有碎裂危险。最好打到一半时从反面再打。反面打孔时,因玻
在毛主席革命路线的指引下,在无产阶级文化大革命的鼓舞和推动下,我国组合机床的生产和技术得到了迅速的发展。以华主席为首的党中央一举粉碎了“四人帮”,国内和国际形势一
鞍钢新钢种工作队与机修总厂、二初轧、一中板等单位协作,结合我国资源,对含锰、钒、氮新钢种进行了试验,初步取得了良好的结果。锰钒氮钢是利用氮化锰铁在冶炼时加入罐内而
按照毛主席关于“独立自主,自力更生”和“洋为中用”的教导,广州机床研究所承担了80米/秒高速磨削液的研制。他们在解剖分析美国336F 冷却液的基础上,结合我国资源情况,进行
近年来,锻件的加热越来越趋向于采用电加热,电加热温度易控制,氧化皮少,易于实现锻造生产的自动化。电加热有二种方式:一种是利用中频感应加热,这种加热速度快,因此生产率高
在对现有桥梁抖振分析理论及计算斜风作用的方法进行总结的基础上,结合大跨度桥梁结构健康监测系统(SHMS)中风速仪实测风特性数据的特点对平均风分解法进行改进,使得风速分解