【摘 要】
:
Herein,we reported in situ synthesis of biomass-derived Ni/C catalyst by self-reduction with pomelo peel.Compared with the conventional method,which includes carbonization,activation,impregnation and reduction,the entire preparation process was simplified
【机 构】
:
School of Chemical Engineering and Energy, Zhengzhou University, Zhengzhou 450001, Henan, China;Key
论文部分内容阅读
Herein,we reported in situ synthesis of biomass-derived Ni/C catalyst by self-reduction with pomelo peel.Compared with the conventional method,which includes carbonization,activation,impregnation and reduction,the entire preparation process was simplified to two steps,which was more straightforward.This synthesis method was green as Ni/C can be prepared without any additional chemical and the self-reduction process was realized in N2,which can avoid using H2 thus averting some problems such as storage,transportation and safety of H2.Meanwhile,the size and dispersion of Ni particles can be controlled by changing carbonization temperature.The synthesis mechanism of Ni/C catalyst with self-reduction was investigated,which was mainly attributed to the carbon and reducing gas produced during the carbonization process.For the catalytic performance of GVL synthesis,a high yield (94.5%) can be obtained and it exhibited good stability up to 5 cycles without obvious loss of catalytic activity.
其他文献
Cobalt molybdate/non-stoichiometric cobalt sulfide (CoMoO4/Co1-xS) hybrid was in situ grown on nickel foam by a simple two-step hydrothermal process.The as-prepared CoMoO4/Co1-xS hybrid electrode possessed core-shell nanostructure,large surface area and h
Fast pyrolysis of biomass will produce various furan derivatives,among which 5-hydroxymethyl furfural (5-HMF) and furfural (FF) are usually the two most important compounds derived from holocellulose.In this study,density functional theory (DFT) calculati
The hydrogen peroxide,a green impregnating agent suitable for lignocellulosic biomass to bioethanol process,was used to pretreat sugarcane bagasse by steam explosion.Two different concentrations of hydrogen peroxide (0.2% and 1%) were investigated.Then,th
Lithium secondary batteries (LSBs) with high energy densities need to be further developed for future applications in portable electronic devices,electric vehicles,hybrid electric vehicles and smart grids.Lithium metal is the most promising electrode for
Three dimensional (3D) nano-LiMn0.6Fe0.4PO4@C/CNT composite was successfully synthesized by an oleylamine-assisted solvothermal method.The prepared composite showed excellent electrochemical performance,especially superior high rate capability.It could de
A novel C/Pb composite has been successfully prepared by electroless plating to reduce the hydrogen evolution and achieve the high reversibility of the anode of lead-carbon battery (LCB).The deposited lead on the surface of C/Pb composite was found to be
A facile hydrolysis method was applied to fabricate high-performance Co-layered double hydroxide (LDH) nanocages/graphene composites for supercapacitors.The materials exhibit enhanced rate capability than the counterpart electrode free of graphene while m
We have studied the redox potentials and electronic properties of C60 and C59N using density functional theory method.It is found that doping C60 with one nitrogen atom results in a slight increase in redox potential.Next,we have also studied C59N functio
Herein,we report visible light active mesoporous cadmium bismuth niobate (CBN) nanospheres as a photocatalyst for hydrogen (H2) generation from copious hydrogen sulfide (H2S).CBN has been synthesized by solid state reaction (SSR) and also using combustion