论文部分内容阅读
08PVRE 耐海水腐蚀结构用铜,经过多年的研究、生产试制和应用,证明该钢种满足了耐海水腐蚀结构用钢的性能要求,具有强度高(屈服强度大于35公斤/毫米~2)、低温韧性好(-40℃梅氏冲击值大于35公斤·米/厘米~2)、耐海水腐蚀性能优良(在飞溅带最大腐蚀率为0.16毫米/年,耐蚀率为碳钢的2～3倍,接近 Mariner 钢的报道水平)等特点。08PVRE 钢立足国内资源,含合金元素少,生产工艺简单,便于掌握,规格为6～16×1600～1800×6000～8000毫米,中板厂可以批量生产。08PVRE 如果经过强韧化处理,可以进一步发挥合金元素的作用,使性能显著提高。该钢种已于1982年10月18日,经冶金部钢铁司组织鉴定转产,可以推广使用。
After years of research and production trial production and application, the 08PVRE copper with seawater corrosion resistant structure proves that the steel meets the performance requirements of steel resistant to seawater corrosion and has the advantages of high strength (yield strength greater than 35 kg / mm2), low temperature Toughness (-40 ℃ Mehs impact value greater than 35 kg · m / cm ~ 2), excellent resistance to seawater corrosion (splash zone with a maximum corrosion rate of 0.16 mm / year, the corrosion rate of carbon steel 2 to 3 times , Close to the Mariner steel reported level) and other characteristics. 08PVRE steel based on domestic resources, with less alloy elements, the production process is simple, easy to grasp, specifications for 6 ~ 16 × 1600 ~ 1800 × 6000 ~ 8000 mm, the plate mill can be mass-produced. 08PVRE toughening treatment can further play the role of alloying elements, so that performance significantly improved. The steel has been in October 18, 1982, the Ministry of Metallurgical Division Division identified the transfer of steel, you can promote the use.