论文部分内容阅读
(一)烧结机英国最早一台烧结机,是在1932年建于福特马达有限公司,它的工作面积仅29米~2。到1959年已在斯劳顿钢铁有限公司建成了烧结面积为132米~2的大型烧结机,实际台时生产能力达到75吨/小时。英国提高烧结机设备能力的措施,主要从两方面着手,一是增大烧结机的工作面积;一是加大单位烧结面积所通过的抽风量。一般每米~2烧结面积的抽风量是60米~3/分钟左右,此时单位烧结面积的产量约为0.71吨/小时·米~2。当单位抽风量增至92-126米~3/分·米~2,则单位烧结面积
(A) Sintering Machine The earliest sintering machine in the United Kingdom was built in Ford Motor Co., Ltd. in 1932 and its working area is only 29m ~ 2. By 1959, a large-scale sintering machine with a sintering area of 132m ~ 2 was built at Sloughton Steel Co., Ltd., and the actual production capacity at the station reached 75t / h. Britain to improve the capacity of sintering machine measures, mainly from two aspects, one is to increase the working area of the sintering machine; one is to increase unit sinter area through the exhaust volume. General per meter ~ 2 sintering area of the exhaust volume is 60 m ~ 3 / min, then sinter output per unit area of about 0.71 tons / hour · m ~ 2. When the unit exhaust volume increased to 92-126 m ~ 3 / min · m ~ 2, the unit sintering area