论文部分内容阅读
在铣削或钻削细长工件时,可以使用如图1所示的简易夹具来固定工件。被加工件的直径为12.70～38.10 mm,最大长度为558.80 mm。该夹具是通过在截面积为
When milling or drilling slender workpieces, you can use the simple fixture shown in Figure 1 to fix the work piece. Diameter of the workpiece is 12.70 ~ 38.10 mm, the maximum length of 558.80 mm. The clamp is through the cross-sectional area