【摘 要】
：
Two amino-functionalized diatomite (DE) composites modified by 3-aminopropyltriethoxysilane (APTS) or glycine (GLY) (i.e., APTS/DE and GLY/DE) were successfully synthesized via the wet chemical method for the time- and cost-efficient removal of indoor for
【机 构】
：
School of Chemical and Environmental Engineering,China University of Mining and Technology(Beijing),
论文部分内容阅读
Two amino-functionalized diatomite (DE) composites modified by 3-aminopropyltriethoxysilane (APTS) or glycine (GLY) (i.e., APTS/DE and GLY/DE) were successfully synthesized via the wet chemical method for the time- and cost-efficient removal of indoor formal-dehyde (HCHO). First, the optimal preparation conditions of the two composites were determined, and then their microstructures and morpho-logies were characterized and analyzed. Batch HCHO adsorption experiments with the two types of amino-modified DE composites were also conducted to compare their adsorption properties. Experimental results indicated that the pseudo-second-order kinetic and Langmuir isotherm models could well describe the adsorption process, and the maximum adsorption capacities of APTS/DE and GLY/DE prepared under optimal conditions at 20°C were 5.83 and 1.14 mg·g?1, respectively. The thermodynamic parameters of the composites indicated that the adsorption process was spontaneous and exothermic. The abundant amine groups grafted on the surface of DE were derived from the Schiff base reaction and were essential for the high-efficient adsorption performance toward HCHO.
其他文献
基于国内外学者相关研究文献及已有的342组自攻螺钉拉拔和拉脱试验结果,对冷弯型钢结构中自攻螺钉连接抗拔性能、抗拉脱性能的研究现状进行总结,并对《冷弯薄壁型钢结构技术规范》(GB 50018—2002)、《冷弯型钢结构技术规范(征求意见稿)》(GB50018—2017)、美国规范(AISI S136-16)、澳大利亚/新西兰规范(AS/NZS 4600:2018)、英国规范(BS5950-5-1998)和欧洲规范(BS EN 1993-1-3:2006)中自攻螺钉设计方法的计算精度和适用性进行比较分析.比较
The carbothermic reduction of vanadium titanomagnetite concentrate (VTC) with the assistance of Na2CO3 was conducted in an ar-gon atmosphere between 1073 and 1473 K. X-ray diffraction and scanning electron microscopy were used to investigate the phase tra
Copper-bearing biotite is a refractory copper mineral found on the surface of the Zambian Copperbelt. Biotite is a copper oxide from which copper is extracted by various methods, especially by leaching. Leaching is the process of extracting a substance fr
As a part of the fundamental study related to the reduction smelting of spent lithium-ion batteries and ocean polymetallic nodules based on MnO–SiO2 slags, this work investigated the activity coefficient of NiO in SiO2-saturated MnO–SiO2 slag and Al2O3-sa
The effect of Al content (0.035wt％, 0.5wt％, 1wt％, and 2wt％) on the composition change of steel and slag as well as inclusion transformation of high manganese steel after it has equilibrated with CaO?SiO2?Al2O3?MgO slag was studied using the method of slag
This study aims at providing systematically insights to clarify the impact of cathodic polarization on the stress corrosion cracking (SCC) behavior of 21Cr2NiMo steel. Slow-strain-rate tensile tests demonstrated that 21Cr2NiMo steel is highly sensitive to
This study investigates the effect of graphene oxide (GO) on the mechanical and corrosion behavior, antibacterial performance, and cell response of Mg–Zn–Mn (MZM) nanocomposite. MZM/GO nanocomposites with different amounts of GO (i.e., 0.5wt％, 1.0wt％, and
Stellite-21/WC nanopowders were deposited on Inconel through vibration-assisted laser cladding with different laser parameters. Optical and scanning electron microscopy, hardness measurements, and wear characterizations were employed to understand the mic
We investigated the effect of the 2-mercaptobenzothiazole concentration on the sour-corrosion behavior of API X60 pipeline steel in an environment containing H2S at 25°C and in the presence of 0, 2.5, 5.0, 7.5, and 10.0 g/L of 2-mercaptobenzothiazole inhi
To improve the properties of Babbitt alloys, Ni-coated-graphite-reinforced Babbitt metal composite specimens were prepared via se-lective laser melting (SLM), and the composites microstructures, mechanical properties, and tribological properties were stud