论文部分内容阅读
Q384抛丸室是我厂的主要清理设备。1983年以来我们对其进行了全面改造,生产能力成倍提高。下面作简要的介绍。一、抛丸系统抛丸生产率的高低,关键决定于抛丸量。该机原使用 Q305B_1抛丸器,名义抛丸量为140kg/min,实际生产中从未达到。再加上皮带张紧机构又经常被弹丸卡死,抛丸器转速常低于2000r/min,所以单个抛头的抛丸量一般只有70kg/min 左右。铸件要抛打2～3次才能清理干净。为了提高抛丸量,我们决定采用Q3025高效抛丸器。根据我厂的实际需要,用
Q384 shot blasting room is my factory’s main cleaning equipment. Since 1983, we have completely reformed them and our production capacity has doubled. Below for a brief introduction. First, the blasting system Shot blasting productivity level, the key decision depends on the amount of shot blasting. The original use of Q305B_1 shot blasting machine, shot blasting capacity of 140kg / min, the actual production has never been reached. Coupled with the belt tensioning mechanism is often stuck by the projectile, shot blasting speed often lower than 2000r / min, so a single throwing shot blasting volume is generally only about 70kg / min. Casting to throwing 2 or 3 times to clean up. In order to improve the amount of shot blasting, we decided to use the Q3025 high-efficiency shot blasting machine. According to the actual needs of our factory, use