【摘 要】
：
Electromagnetic interference (EMI) shielding materials have received considerable attention in recent years. The EMI shielding effectiveness (SE) of materials depends on not only their composition but also their microstructures. Among various microstructu
【机 构】
：
School of Shaanxi University of Science and Technology,Xi’an 710021,China;Engineering Laboratory of
论文部分内容阅读
Electromagnetic interference (EMI) shielding materials have received considerable attention in recent years. The EMI shielding effectiveness (SE) of materials depends on not only their composition but also their microstructures. Among various microstructure prototypes, porous structures provide the advantages of low density and high terahertz wave absorption. In this study, by using carbonised wood (CW) as a template, 1-mm-thick MAX@CW composites (Ti2AlC@CW, V2AlC@CW, and Cr2AlC@CW) with a porous structure were fabricated through the molten salt method. The MAX@CW composites led to the formation of a conductive network and multilayer interface, which resulted in improved EMI SE. The average EMI SE values of the three MAX@CW composites were > 45 dB in the frequency of 0.6–1.6 THz. Among the composites, V2AlC@CW exhibited the highest average EMI SE of 55 dB.
其他文献
研究环保型塑解剂A86在半钢子午线轮胎胎体胶中的应用.结果 表明:在以天然橡胶为主的半钢子午线轮胎胎体胶中添加塑解剂A86,胶料的门尼粘度大幅降低,焦烧时间延长,加工性能改善;硫化胶的定伸应力和钢丝粘合力提高;成品轮胎的强度性能、耐久性能和高速性能均达到企业标准要求.
The growing demand for high-power-density electric and electronic systems has encouraged the development of energy-storage capacitors with attributes such as high energy density, high capacitance density, high voltage and frequency, low weight, high-tempe
不溶性硫黄Crystex Cure Pro(简称Cure Pro)具有高分散性、高热稳定性、高含量等特点.在全钢子午线轮胎中使用Cure Pro替代不溶性硫黄HDOT20可减少胶料的喷霜,提高胶料与钢丝的粘合性能.同时因Cure Pro的有效硫含量较高,其在配方中的用量可减小,性价比较高.
介绍影响全钢载重子午线轮胎成品室内试验数据准确性的主要因素,结合试验设备精度的标定和试验方法的调整等,提出相应的改进措施,可以提升全钢载重子午线轮胎成品室内试验数据的准确性和轮胎行驶的安全性.
研究不同种类粘合树脂对轮胎带束层胶料性能的影响.结果 表明:新型粘合树脂MPRF,PRF和MPF游离单体含量低,在胶料加工过程中不产生刺激性气味,不冒烟,环保;与添加普通粘合树脂SRF的胶料相比,添加新型粘合树脂MPRF,PRF和MPF的胶料FL和Fmax较低,抗硫化返原性相对较好,门尼焦烧时间较长,胶料加工安全性提高;硫化胶的拉伸强度和拉断伸长率较高;钢丝帘线H抽出力在1000 N以上,完全能满足带束层对钢丝帘线粘合性能的要求.
通过控制胎面挤出过程,调整基部胶厚度占胎面总厚度的比例(以下简称基部胶厚度占比,分别取20％,35％和50％),研究胎面基部胶厚度占比对轮胎性能的影响.结果 表明,适当增大基部胶厚度占比可以提高轮胎的耐久性能,减小轮胎过坎冲击力,提高乘坐舒适性,增大侧向力,提高操纵性能,增大纵向力和接地面积,提高抓着性能和制动性能,并且降低滚动阻力系数,提高燃油经济性.
This study investigates the bulk density, sintering behaviour, and microwave dielectric properties of the MgO–2B2O3 series ceramics synthesised by solid-state reaction. According to the X-ray diffraction and microstructural analyses, the as-prepared MgO–2
如何安全、科学、高效地处置橡胶企业事故已经成为消防救援队伍面临的重要课题.本文分析顺丁橡胶生产工艺过程的火灾危险性,结合江苏某石化橡胶有限公司“1.12”爆燃事故处置方案,探究顺丁橡胶生产类火灾的现场处置措施,为橡胶生产装置类火灾扑救工作提供参考,并针对橡胶生产企业日常安全管理工作提出建议.
The microstructure of polymer-derived ceramics (PDCs) was closely related to processing. This study demonstrated that SiCN matrix prepared by polymer infiltration and pyrolysis (PIP) at 900℃ inside a Si3N4 whisker (Si3N4w) preform with submicro-sized pore