三角皮带接头的方法

• 作 者: 联
• 出 处: 金属加工(冷加工)
• 发表日期: 1966年04期
• 关键词: 三角皮带 螺钉 接头 接长 拼紧 截短 皮带 三将

三角皮带需要截短或接长使用时,可用压板螺钉法拼接(如图1)。具体方法是:首先把皮带的两端面切割平整;再在皮带上钻孔;把被连接两端拼紧后,装上上、下压板,用螺钉压紧(见图2);将

V-belt truncated or long-term use, the plate can be used splicing method screw (Figure 1). The specific method is: First, the two ends of the belt cut smooth; then drill holes in the belt; the ends of the connection is tightened, fitted with upper and lower plate, with a screw pressure (see Figure 2);