【摘 要】
：
Cylinder deactivation performance in vehicle gasoline engine is investigated by experimental and simulated methods,this technology is implemented by adjusti
【机 构】
：
Technical Center,Great Wall Motor Co.,Ltd.
论文部分内容阅读
Cylinder deactivation performance in vehicle gasoline engine is investigated by experimental and simulated methods,this technology is implemented by adjusting the valve system,and furthermore,a simulated model is built in GT-power.The results show that,in cylinder deactivation mode,the overlap degree of naturally aspirated and effective region is highly,it can be considered that the cylinder deactivation engine just operates in naturally aspirated state.At 2bar@2000rpm,BSFC of cylinder deactivation is 312.7g/kW·h,the fuel efficiency is improved 12.6%than normal state.With the reduced engine speed,fuel effieiceny becomes better,however,with the increment speed,engine NVH characteristic has been deteriorated.
其他文献
对以平均值模型转矩估计值为基准部分、以卡尔曼滤波器(Kalman Filter,KF)转矩估计值为修正部分的柴油机转矩估计方法进行了研究.平均值模型的输入量为发动机转速、进气压力
本文以多缸柴油机的冷却水腔为研究对象,使用Fluent软件对直列6缸柴油机冷却系统的流场进行仿真,主要研究了柴油机各缸水套和缸盖内部水腔压力和流场的分布规律,以及冷却液入
The friction and wear capabilities of four coatings piston ring which Chromium,PVD,PCVD and GDC were studied with simulated way.The results indicate that GD
对目前汽车行业中发动机曲轴的强化工艺以及淬火感应器进行了相关探讨,并针对一种具体的圆角淬火感应器,从硬件和淬火参数方面进行了相关节能优化改造研究.
两缸柴油机采用360℃A发火间隔角,在工作周期中会出现进气和排气空档角,导致进排气压力波动较大,引起涡轮效率的下降.针对这一问题,建立了2缸柴油机整机一维模型,并对涡轮内
在严格的排放法规和燃油经济性要求下,柴油机发动机的控制策略显得尤重要.基于模型的控制策略开发提高了产品的开发效率,减少了开发费用,硬件在环(Hardware In Loop,HIL)作为
本文基于自主开发的内燃兰金循环发动机试验台架系统,研究了不同压缩比对内燃兰金循环燃烧过程的影响.试验结果表明,喷水温度为120℃时,压缩比从10.5提升至12.5,与未喷水相比
An experimental investigation of multiple injection at intake stroke under warm up conditions was performed in a GDI engine.With a constant excess air ratio
以某增压直喷汽油机为研究对象，对外部EGR率对该汽油机HCCI工况范围的影响及其拓展能力进行研究，同时结合GT-Power软件研究并预测EGR率对HCCI工况范围的拓展程度.结果表明，
在一台涡轮增压PFI发动机上安装火花塞式离子电流传感器，在不同燃烧状况下对比离子电流信号与缸压信号及燃烧特征值的关系。当发动机转速不变时，随着负荷的增加，离子电流信