论文部分内容阅读
原位聚合法荷正电聚丙烯多孔膜的制备及其结构与性能的研究
【机 构】
：
浙江大学膜与水处理技术教育部工程研究中心,杭州 310027
【出 处】
：
第八届全国膜与膜过程学术报告会
【发表日期】
：
2013年11期
其他文献
Numerical simulations with discrete particle models(DPM)are finding growing applications in optimizing the design and operation of fluidized beds,where the drag plays a very important role.
A computational particle fluid dynamics(CPFD)approach was applied to investigate the residence time distribution(RTD)and back-mixing behavior of solids in a circulating fluidized bed(CFB)riser.
In present work,the gas-solid two-phase flow in a flat-bottom multiple-spouted bed is simulated by the Eulerian-Eulerian approach.The kinetic theory of granular flow is used to close the equations,and
The effects of static bed height on particle velocities in a two-dimensional jetting fluidized bed u
Jetting fluidized bed(JFB),another type of spouted bed,where the jetting phenomena is an important considerations,is the spouted fluid bed,especially when the jet does not penetrate through the bed li
Based on the analysis of the gas-solid flow in the Cyclone hydrogenation reactor by using the computational fluid dynamics(CFD)software Fluent 6.3,the gas-solid flow field of the Cyclone hydrogenation
以天然石墨和葡萄糖为碳源,通过180℃/12h的水热条件和低温热解过程成功制备含33％石墨烯、5％无定形碳的碳包覆CoFe2O4/石墨烯纳米复合材料.透射电镜显示晶格条纹间距为0.25 nm,对应CoFe2O4晶粒 (JCPDS No.22-1086) 的(311)面,并且拥有薄碳层的小尺寸CoFe2O4纳米粒子高密度的均匀分散在褶皱的石墨烯片层上.
会议