Study on the Asphalt Mizture Digital Image Processing

来源 :第五届交通运输领域国际学术会议 | 被引量 : 0次 | 上传用户:d452490001
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
According to the study for the automatic measurement and analysis of the asphalt mixture system, this paper makes a thorough discussion to the algorithm of digital image seg mentation, and it offers selection methods of various thresholds. Moreover, it uses characteris tics in the intensity histogram of the asphalt mixture, to analyze and compare the actual pro cessing results of various algorithms. It provides the reliable basis for extracting the following characteristic value and improving the calculation of the parameters of the aggregate particle. Meanwhile, it plays an important role in improving the measure accuracy of the whole detection system.
其他文献
粉油比作为沥青混合料配合比设计和施工现场级配控制的参考指标,应给予足够的重视。本文采用自制仪器对纤维沥青胶浆进行不同粉油比下的高低温性能试验,通过分析确定纤维沥青胶浆的粉油比合理范围为1.2~1.6。采用与纤维沥青胶浆相同范围的粉油比对纤维沥青混合料进行级配设计及高、低温性能试验,确定纤维沥青混合料的粉油比合理范围为1.08~1.48。并在假定粗、细集料表面沥青膜厚度相同的前提下,建立相应公式找到
本文提出了一种沥青改性的新思路,即通过活性剂使分散在沥青中的高聚物分子间起化学反应,以化学键的形式在分子链之间形成强有力的三维空间网状互穿结构,使高聚物宽广的粘弹域和优异的粘弹性能优势在沥青中得以充分地发挥。化学网构的形成及产品性能通过室内测试分析得到证实。通过调整配方,设计了化学网构的热历程,满足了施工工艺要求,产品成功应用于试验路。开发的改性沥青生产设备采用高速剪切与二次泵组合技术生产改性沥青
本文通过对半刚性材料干燥收缩机理和现常用测试方法优缺点分析,设计了新的更能模拟工程实际的测试仪器,用该仪器进行了不同温度、湿度环境下的不同细集料级配、不同结合料配比的干燥收缩试验,揭示了半刚性基层材料的收缩特性,并提出减少干燥收缩的方法。
The Huning Expressway serves a vital role in the movement of passengers and goods from Shanghai to Nanjing, so it is imperative that the highway provide good, long-term service to the traveling public
In an ongoing transportation pooled fund study on refining Superpave binder specifi cations, 12 full-scale pavement lanes with various modified asphalts were constructed at the Federal Highway Adminis
Artificial Intelligence and Fuzzy Sets theories have found a wide range of applications in engineering. In this paper, a fuzzy linear clustering method was applied to estimate the pavement parameters
The Long Tenn Pavement Performance (LTPP) Specific Pavement Study Experiment 2 (SPS-2), Strategic Study of Structural Factors for Jointed Plain Concrete Pavements ( JPCP), is one of the key experiment
This paper presents the comparison between the results of the Semi-Circular Bending (SCB) test and that of the Indirect Tensile (IDT) test in characterizing the tensile strength of hot-mix asphalt (HM
In the past two decades, micromechanical modeling has been recognized as one of the best approach in studying asphalt mixture. The micromechanical models have tremendous potential benefits in the fie
Different types and kinds of SBS modifiers make remarkable improvements on modi fied asphalts. Performances of modified asphalts made by different proportions and usage of SBS modifiers with different