【摘 要】
：
The construction of an intelligent optical bio-imaging probe with both fluorophores and functional groups is of particular interest for in vitro and in vivo imaging probe development.
【机 构】
：
School of Chemical Engineering,Sungkyunkwan University,Suwon 440-746,Republic of Korea
论文部分内容阅读
The construction of an intelligent optical bio-imaging probe with both fluorophores and functional groups is of particular interest for in vitro and in vivo imaging probe development.
其他文献
酰胺是天然产物及药物合成中的一种重要的化合物,所有天然肽链和蛋白质的骨干结构都是由酰胺键组成的.酰胺键也存在于许多小分子物质中,不少药物中都含有酰胺基团,故对于酰胺合成的研究具有重要的意义.
将相同质量分数的Na2O,K2O 采用表面浸渍方法分别浸渍到CoMo/Al2O3 催化剂上,通过小型固定床反应器,以DBT 为模型化合物,分别考察了其对HDS 反应活性的影响,目前DBT 的加氢脱硫过程主流机理主要有氢解路径[1]和消除路径[2]两种。
钛硅分子筛TS-1 自1983 年成功合成以来,如何进一步提高钛硅分子筛/H2O2 体系催化氧化性能成为众多科研工作者关注的焦点.研究表明,钛硅分子筛的催化中心除了主要来源于四配位Ti4+中心外,还来源于更高活性的六配位TiO6 活性中心[1,2],因此如何进一步构建高配位Ti 活性中心成为科研工作者关注重心.
The development of stable,highly active water spitting catalysts based on low-cost and earth-abundant materials is crucial for future renewable energy application.
Xylene is an important chemical material.Now the alkylation of benzene with methanol over hierarchical porous ZSM-5 is a potential way in xylene production.However,it should be noted that ethylbenzene
聚乙二醇[Poly(ethylene glycol),简称PEG]是常见的液体低聚物,可溶性高分子担载催化剂,近年来,将催化剂动态地担载至其中,通过"均相反应,两相分离"的途径,实现均相催化剂的分离回收.
全结晶复合孔催化剂是由分子筛本体与粘结剂在一定条件下转晶并原位刻蚀形成的一类具有多尺度孔道结构的催化材料[1].本文通过对比含粘结剂的成型催化剂,利用固体核磁技术研究了全结晶复合孔ZSM-5 催化剂的结构特点.
将含氧化合物加氢脱氧制备航空煤油范围烷烃是目前国内外生物质催化转化的一个研究热点 [1-3].传统生物质转化移出氧的过程中需要消耗大量的氢气,本文通过将多元醇的水相重整与含氧化合物的加氢脱氧耦合起来制备航空煤油范围内的烷烃可节省氢气的使用.
Postassembly modification strategy has been successfully employed in the construction of discrete metallosupramolecular assemblies.1 However,the most known reports have been limited to the simple stru
Three Near-Infrared (NIR) amphiphilic BODIPY derivatives were prepared and their photophysical properties in good solvents (such as THF) and bad solvents (such as water) were investigated,respectively