Preparation and Thermal Properties of Soluble Poly(phthalazinone ether sulfone ketone) composites re

来源 :第二届中国国际复合材料科技大会 (CCCM-2) | 被引量 : 0次 | 上传用户:iflytekmilk
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  A series of poly (phthalazinone ether sulfone ketone) (PPESK)/multi-walled carbon nanotube (MWCNT) buckypaper nanocomposites with different contents of MWCNT was fabricated by heat press process with alternate laminating of soluble PPESK films and MWCNT buckypapers.Best conditions to infiltrate the resin in the buckypaper were determined by optimizing the residual solvent content in the PPESK film and processing cycle.
其他文献
A new microwave-absorbing material was prepared by electroless plating and coprecipitation method through double-coating cobalt-nickel metal (Co/Ni) and magnetite (Fe3O4) particles on cenospheres.The
In the present work, a series of polyurethane/montmorillonite (PU/MMT) composites have been prepared by in situ polymerization using polymethylene polyphenyl polyisocyanate, 2, 2-Dimethylolpropionic a
Delamination defects was one of the common and serious defects in the laminated cylindrical shell.For the laminated shell with delamination, even the presence of local delamination could lead to a red
Because of the weakness of composite laminates in the out-of-plane direction, the localized hail impact on composite structures can result into the very dangerous potential failure during the future s
As composite become more popular on modem aircrafts, it is necessary to better predict and reduce the curing deformation after the curing process.In order to predict the warping deformation, an effect
In this study, the effects of functionalization of mutliwalled carbon nanotubes (MWCNTs) on mechanical and thermal properties of MWCNTs/Epoxy nanocomposites were investigated.The composites were fabri
In this work, multi-walled carbon nanotubes (MWCNTs) coated with surfactant and biomacromolecule were embedded in polyvinylidene fluoride (PVDF) by solution blending.Fourier transform infrared (FTIR)
A kind of CoO hexagon plate was synthesized by a simple solution precipitation method.Three samples with different edge lengths can be synthesized just by changing the moment of alkali.Then the layere
In order to obtain uniform dispersion of graphene throughout poly(vinyl chloride) (PVC) matrix and significant mechanical reinforcement of the graphene/PVC composites in a simply way, we first synthes
本文采用溶液共混法,以纳米碳酸钙(nano-CaCO3)和纳米碳化硅(nano-SiC)作为增强剂,改性聚乳酸(PLA)制备了PLA基复合材料,并对PLA复合材料的断裂韧性及力学性能进行了研究.实验结果表明,当nano-CaCO3和nano-SiC含量分别为0.5%和1%时,nano-CaCO3/PLA和nano-SiC/PLA复合材料的断裂韧性达到最大值,分别比改性前提高了116%和154%.