Flux Decline Behaviors in Microfiltration of Activated Sludge and Its Supernatant

来源 :The 6th Joint China-Japan Chemical Engineering Symposium(第六届 | 被引量 : 0次 | 上传用户:WAIN154
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  The properties of dead-end microfiltration were explored under constant pressure using two types of activated sludge controlled under the condition of different air flow rates.The activated sludge cultured at the air flow rate of 0.15 L/m in (the anaerobic condition) exhibited a significant flux decline compared with the case of the air flow rate of 2.33 L/min (the aerobic condition).It was found from the results of microfiltration of the supernatant separated by centrifugation that the constituents in the supematant caused a major cake resistance in microfiltration of the activated sludge.The average specific filtration resistance for filtration of the activated sludge was closely consistent with that for filtration of the supernatant at low pressure (49 kPa).However, the cake resistance of the microbial floc in microfiltration of the activated sludge became substantial with increasing filtration pressure because of high compressibility of the microbial floc.Moreover, the foulant and the fouling mechanism in microfiltration of the supernatant were evaluated from both microfiltration test of the supernatant and microfiltration test of the filtrate collected thereby.As a result, the effects of the pore size and material of the microfiltration membrane on the flux decline behaviors in dead-end microfiltration were reasonably elucidated.
其他文献
Surface morphology of a Pd membrane was modified to improve hydrogen flux.Pd membranes were prepared by an electroplating by changing current density, viscosity of the solution and stirring conditions
Dynamics of colloidal flocculation induced by cationic polyelectrolyte was studied in order to evaluate the effective layer thickness of the adsorbing polyelectrolyte under the condition of sufficient
Microbubbles have large specific interfacial area, low rising velocity, high inner pressure, and high electricity on the surface.The bubbles absorb hydrophobic materials suspended in water.In this stu
Several types of PLA-PEG-PLA triblock copolymers with different molecular weight of PEG segment were synthesized by a ring-opening anion polymerization and were used as hydrophilic additives for PLA h
Thin Li4SiO4 is successfully prepared on porous alumina substrate by using a novel solid conversion method.Porous silica such as silicalite was used as a silica source.The ratio of Li4SiO4 increased w
The melanoidin containing wastewater was generated from the distillation process in the bioethanol production facility.In this study, the melanoidin in water was decomposed by ozone microbubbles and t
The performance of freeze concentration at constant freezing rate (40 mm/h) with/without ultrasonic irradiation was examined using three one-component solutions containing only one solute (ionic or mo
Wastewater treatment characteristics in submerged membrane activated sludge process (SMASP) was studied for various sludge retention time (SRT) under a constant BOD loading (0.5 kg-BOD/(m3·d)).The SMA
Fermentation and microfiltration characteristics of D-lactic acid producing bacterium were evaluated in order to provide fundamental understanding of the optimization of fermentation process.Productio
The gradual decrease in the filtration flux rate with time, which occurred due to the capture of solid particles and/or organic substances onto the surfaces of pores in the thin filter medium such as