基于形状记忆聚合物复合材料的可展开结构的设计及分析

来源 :第二届中国国际复合材料科技大会 (CCCM-2) | 被引量 : 0次 | 上传用户：ljmworkshop

【摘要】

：

基于形状记忆聚合物复合材料的可展开结构相较传统的可展开结构具有高可靠性、低成本、轻质及不需要复杂机械结构便可实现自展开的优点。形状记忆聚合物是一种可记忆的原始形状的激励响应型智能材料，当受到外界激励时可由变形形状恢复到原始形状。为了提高形状记忆聚合物的模量和回复力，以使其满足实际需求，形状记忆聚合物复合材料被广泛研究。

【作者】

：

李丰丰王通李相宇刘立武刘彦菊冷劲松

【机构】

：

航天科学与力学系,哈尔滨工业大学,哈尔滨,150001,中国复合材料与结构研究所,哈尔滨工业大学

【出处】

：

第二届中国国际复合材料科技大会 (CCCM-2)

【发表日期】

：

2015年7期

【关键词】

：

形状记忆聚合物可展开结构展开实验

下载到本地 , 更方便阅读

下载此文赞助VIP

声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架

论文部分内容阅读

其他文献

Near-field microwave nondestructive and quantitative evaluation of liquid ingress in sandwich compos

Sandwich composites are widely utilized in various environments and applications.In-service and environmental stresses can cause unwanted defects such as impact damage, crushed core, skin missing, dis

会议

sandwich compositemicrowave NDEnear-field scanningwater ingress

Application of ultrasonic phased array technology to the detection of defect in composite stiffened-

Composite stiffened-structure consists of the skin and stringer has been widely used in aircraft fuselage and wings.Due to the complexity of the structure, the insufficient of curing pressure led to c

会议

compositesultrasonic phased arraysnondestructive testingstiffened-structures

A Scanning Laser Thermography Method and Its Application in Detecting Surface Crack in TBC

Quantitatively detecting crack defects in thermal carrier coatings (TBC) materials using often presents a challenge for the traditional nondestructive testing methods due to the properties of porosity

会议

Scanning laser thermography methodThermal barrier coating (TBC)Surface crack

Residual stress measurement in micro-region using digital image correlation method

The residual stress of zirconia filmson a stainless steel substrate is measured using the digital image correlation (DIC) method.A lattice structure with period of 130nm is milled by focused ion beam

会议

digital image correlation (DIC)focused ion beam (FIB)residual stress

Microscopic bulge test applied to creep deformation measurement of polymer film

High molecular materials such as polyimide are well known for their advantages of light weight and high strength, drawing increasing attentions recently.Moreover, such materials are generally used as

会议

Hierarchical Nanotube-Constructed Porous TiO2-B/Carbon Spheres with Highly Enhanced Lithium Battery

In this work, hierarchically porous TiO2-B/Carbon spheres have been synthesized via a hydrothermal process using amorphous titania/oleylamine composites as a self-sacrificing template.A careful inspec

会议

Optical experimental techniques for characterizing matrix crack-inclusion interaction of composite m

Due to the demanding service environments, engineering materials with more than one phase and exploit beneficial characteristics of individual constituents to achieve the desired over all properties h

会议

Optical experimental techniquesmechanics of compositesmatrix crack-inclusion i

Health monitoring of 1D and 3D Beam Structures

This paper introduces a method on health monitoring of ldimensional and 3 dimensional discrete structures, such as a beam structure.First, it illustrates a procedure based on single-level discrete 1-D

会议

DWTCWTDelaminationFailure Index

Facile Synthesis of LiNi0.5Mn1.5O4@PANI Nanostructrues with Tunable Morphologies as Cathode Material

The increasingly prominent energy and environment problems accelerate the rapid development of the lithium ion batteries.LiNi0.5Mn1.5O4 (LNMO) possesses a specific capacity of about 140 mA h g-1 and h

会议

航天器用复杂异型结构件复合材料轻量化研究

复杂异型结构件(以下简称"支架")是航天器总装设计的重要组成部分，目前主要采用金属材质铸造成型，重量较大，成品率较低。复杂的太空环境要求对角度要求苛刻的支架具有非常高的尺寸稳定性。因此为提高结构刚度和减重，选取典型结构的支架进行轻量化研究。首先根据碳纤维复合材料的性能参数、支架边界条件等建立有限元模型并进行仿真分析。其次在突破复合材料支架成型技术的基础上完成了复合材料支架的制备。最后制定试验方案，

会议

复杂异型结构件复合材料成型试验轻量化

基于形状记忆聚合物复合材料的可展开结构的设计及分析

其他学术论文