Study on Properties of UV-Moisture Dually Cured Epoxy Acrylate Coatings Modified with Siloxane

来源 :2012防腐蚀涂料年会暨NACE上海年会涂料分会 | 被引量 : 0次 | 上传用户:lovesici
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Epoxy acrylate was modified with tetraethoxysilane and the modified epoxy acrylate were UV-moisture dually cured under ambient conditions. The structures of the cured coatings were analyzed with FT-IR spectrometer and the properties were investigated. Tetraethoxysilane reacted with the hydroxyl groups of epoxy acrylate and siloxane groups attached to the epoxy acrylate. After modification the viscosity of the epoxy acrylate decreased up to 80 %. Moisture curing introduced additional SiO2 cross-linkage to the UV cured coatings and enhanced the hardness, adhesion, wearing resistance, hydrophobility and thermal stability of the dually cured coatings.
其他文献
本文论述了管道冲蚀磨损的机理,介绍了国内使用的各种耐磨管道,分析了主要耐磨管道的使用情况,推荐应用双金属复合管道。
利用氧化锌的两性性质和七钼酸铵水解后呈弱酸性的性质。通过反应合成纯度较高的钼酸锌。在最佳反应温度70℃、反应时间1h和母液回用的条件下,产品钼收率达到了98%以上。该工艺可做到无废水排放,产品过滤容易,提高了生产效率。
随着涂料行业的迅速发展,适用于各种不同环境类型的特种涂料应运而生。中国涂料株式会社生产的PERMASTAR WE系列产品是针对于海洋设施、水利、城建等水中(下)建筑结构表面防腐的一款特种涂料,本文针对该涂料的技术特点及涂装施工进行探讨。文中首先介绍了海上设施的腐蚀环境分布图,然后提出了水下固化型涂料的特性要求,最后列举了相关的施工示例。
In this paper, research progress on corrosion and protection inspection technology for submarine pipeline is introduced. The advantages and limitations of different methods are analyzed. The survey te
本文首先介绍了绿色环保涂料,然后指出了绿色环保型涂料溶剂的毒性,提出了如何使涂料环保绿色成为可能,并对中国及其他国家VOC排放标准进行了对比研究。
本文根据国内气候环境情况。主要从腐蚀介质。腐蚀方式和防腐措施等方面进行了综述。重点介绍了涂料涂装防腐技术的防腐机理及无毒防腐涂料的发展状况。
Damage to pipe coating is almost unavoidable during transportation and construction and damage or holidays in pipe coatings may expose the pipe to possible corrosion. Cathodic protection systems are i
研制了具有优异的防火隔热性能和防腐性能的钢结构防火涂料用防腐树脂。采用了在环氧树脂分子结构中引入含甲氧基官能团的聚合法,用有机硅树脂改性环氧树脂。再用改性环氧树脂对丙烯酸树脂进行改性,以提高树脂的耐候性、耐腐蚀性和耐水性。并介绍了对其树脂的改性、制备工艺、应用性能及防腐性能等方面的研究工作。
To meet the requirement of Chinese West-East Gas Pipeline, AW-01 Flow Efficiency Coating for gas pipelines was developed by the Authors Institute, which could form smooth film with excellent adhesion,
通过改良优化配方,产品优化升级成功制备出新型耐高温阻烧延车间底漆。耐高温达1200℃,烧延面积小。焊接性能好。大大减少二次除锈重涂的工作量。在很大程度上降低制造成本;耐高温阻烧延车间底漆施工操作简单、方便。环保。并且采用醇类溶剂作为稀释剂。对操作工人身体无毒害。该材料填补国内车间底漆应用中的诸多不足。具有广阔的市场前景和很高的经济效益及社会效益。