A Novel Multi-layer Broadband THz Metamaterial Absorber

来源 :第十四届全国敏感元件与传感器学术会议 | 被引量 : 0次 | 上传用户:tprgaefe
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  In recent years great effort has been put into THz technology research area due to the gradually scarce spectrum resources.Broadband absorber in terahertz frequency domain shows its great significance in energy harvesting and spectrum detection applications.Based on the metamaterial design concept, a new multi-layer structure with square gird unit cells is proposed in this paper to enormously expand the absorption bandwidth.Greater than 90% absorption is achieved across a frequency range of 1.75 THz, from 3.25 THz to 5 THz.The influence of geometric parameters changing of the proposed structure on absorption frequency domain was simulated with the CST Microwave Studio simulation platform software.This multi-layer metamaterial structure has the advantages of simple structure, ultra-broadband absorption frequency domain,and a mature and stable manufacturing process.Therefore, this metamaterial absorber and the corresponding design method can promote the terahertz technology's application in Wireless THz communication Area.
其他文献
采用超磁致伸缩材料(TbxDy1-xFe2-y)、压电材料与谐振音叉复合构建了一种新型谐振磁场传感器.谐振音叉采用三梁对称结构,黏结于中间梁两端的PZT压电薄膜,分别用于激励音叉产
会议
当前航天运载器普遍使用液氢、液氧低温推进剂等清洁燃料,针对低温介质特性,本文介绍了电容式液位传感器测量原理及特点,分析了电容式液位传感器的分布电容类别及分布电容对
不平衡振动是旋转机械失效的重要原因之一,多数旋转机械在生产、使用过程中均需进行动不平衡检测与校正。动平衡机转子摆架振动系统不平衡量引起的振动位移正比于转速的平方,
会议
本文采用新型的差分脉冲阳极溶出伏安法检测液相环境下的铅、镉重金属离子.通过改变不同的实验条件,优化实验参数,最终选用以玻碳电极同位镀汞的方法测定液相环境下的铅、镉
本文研究用变容二极管测量交变电场的原理和实现方法.原理分析表明:因为变容二极管本身的电容值随着外电场变化而变化,所以当变容二极管作为振荡电路的频率控制元件时,会使得
纳米材料具有大比表面积和可控物化性能,是获得高性能传感材料的基础.目前,提高半导体气体传感器敏感性能的手段主要是针对金属氧化物半导体纳米材料宏观性能的调控——结构
会议
为了实现光纤Fabry-Perot(F-P)腔压力传感器初始腔长的标定,建立了单光楔偏振解调系统.对该系统采用了互相关计算理论分析.根据实验测量的光谱进行高斯拟合,获得Matlab仿真所
会议
小尺寸、免维护、可移动的自供能系统尤其是自供能传感器具有非常广阔的应用前景.自供能系统本身可以从周围环境中收集能量并且转化为电能,为系统中各种功能器件的运行提供电
会议
  In this paper, the Co-Mn-Fe-O (CMF) ceramic materials are prepared by the high energy ball milling process,and the phase structures, microstructures and ele
会议
大脉宽高冲击加速度传感器的冲击灵敏度校准一般采用空气炮作为激励手段进行高冲击测试.为准确测量加速度传感器在高冲击条件下的运动情况,本文基于光切割方法,设计了一种多
会议