• 不 限
  • 期刊论文
  • 硕博论文
  • 会议论文
  • 报 纸
  • 英文论文
  2. 您的位置
  3. 首页
  4. 会议论文
  5. Monodisperse Li1.2Ni0.12Co0.12Mn0.56O2 microspheres with improved electrochemical performance

Monodisperse Li1.2Ni0.12Co0.12Mn0.56O2 microspheres with improved electrochemical performance

来源 :第十八次全国电化学大会 | 被引量 : 0次 | 上传用户：lqlq2323
【摘 要】
：
Rechargeable lithium-ion batteries(LIBs) are one of the most promising energy storage devices for electric vehicles(EV) and hybrid electric vehicles(HEV),because of their high energy density,high powe
【作 者】
：
Yanhong Xiangi Jian Li Xianwen Wu Lizhi Xiong Zhixiong Liu Zeqiang He Zhoulan Yin 
【机 构】
：
School of Physics and Mechanical & Electrical Engineering,Jishou University,Jishou,Hunan 416000
【出 处】
：
第十八次全国电化学大会
【发表日期】
：
2015年7期
下载到本地 , 更方便阅读
下载此文 赞助VIP
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Rechargeable lithium-ion batteries(LIBs) are one of the most promising energy storage devices for electric vehicles(EV) and hybrid electric vehicles(HEV),because of their high energy density,high power density,low cost,superior safety,stable charge/discharge cycling and long lifespan[l].
其他文献
Progressive failure analysis of braided composites T-joints underbending loading
According to the structure characteristics and fiber structure of the composite T-joint manufacturing by resin transfer moulding(RTM), and based on the ANSYS finite element numerical analysis software
会议
progressive failure2-D braided compositesT-jointsfailure criteria
Experimental investigations on low velocity impact ofdomestic aramid fiber reinforced composite lami
The low velocity impact performance of domestic aramid fibre reinforced composite laminates was investigated experimentally, to study the effects of laminate thicknesses and impact energy on the impac
会议
Domestic aramid fiberLaminatesLow velocity impactExperimental investigationD
Prediction of mixed-mode delamination growth rate for composite laminates
In this study, a new mixed-mode delamination failure criterion is developed based on an energy release rate prediction methodology for orthotropic materials, a critical plane approach and a nominal ap
会议
Fatiguecrack growth ratemixed-modecritical planecomposites
A progressive fatigue damage model based on residual strain
Based on the fatigue accumulated damage mechanisms of composite materials, a residual strain model is presented.The residual strain is associated with fatigue modulus,resulting from which the paramete
会议
Composite structuresCompression fatigueLife predictionFinite element methodR
Analysis and comparison of vibration characteristics of rectangular resin matrix composite plate und
Transverse vibration vertical to middle surface of resin matrix composite plate is a prevalent problem.This paper presents a vibration differential equation under accurate boundary conditions with ela
会议
Rectangular resin matrix composite platevibration modefrequencydifferent boun
Improvement of Interlaminar Mechanical Properties of CFRP Laminates Based on Nanofiller Interface Re
With excellent in-plane mechanical properties, Carbon fiber reinforced plastic (CFRP) laminates have been widely used in many structural engineering fields.[1] However, their out-plane i.e.interlamina
会议
Carbon fiber reinforced plastic laminates (CFRP)nanofiller interleaffracture t
Prediction Study on Fatigue Life of Composite Cylinders
There are obvious disadvantages in the ASME pressure vessel code which is used to calculate the fatigue life of cylinders by adopting an equivalent strain method, because it cannot take account of the
会议
Composite cylinderMultiaxial fatigueFatigue life prediction
不同纤维增强泡沫夹心三明治结构的低速冲击及冲击后压缩行为研究
泡沫材料在冲击过程中能够较好的吸收外部冲击能量，与一般材料相比，泡沫夹心三明治结构具有较好的耐冲击性能。作为三明治层合板用的玻璃纤维与碳纤维面板具有不同的力学性能：玻璃纤维韧性好而强度较差，碳纤维强度较好而韧性差。因此在外部冲击载荷作用下，采用二者作为面板的三明治结构的失效机理不尽相同，材料的耐冲击容限也不一致，因此需要对二者进行研究。冲击后的压缩强度(CAI)是衡量材料冲击完整性及耐冲击性能的重
会议
低速冲击玻璃纤维碳纤维冲击后压缩三明治结构
Investigation of progressive damage analysis ofbonding patch repaired composite laminates
A stiffness degeneracy reduction analysis method based on Mayes model for composite laminates was presented in this paper.Meanwhile another analysis method that use damage state variable to simulate t
会议
compositerepairstructuredamageanalysis
“面-面”接触模式磷酸铁锂@石墨烯复合材料的制备及电化学性能研究
电子传输和锂离子扩散速率是制约磷酸铁锂材料电化学性能的关键[1-3].本研究采用一种简易的 溶剂热方法合成了一种"面-面"接触模式的磷酸铁锂@石墨烯复合材料(LFP@GNs).在该复合 材料中,(010)晶面择优取向的磷酸铁锂纳米板原位生长于石墨烯纳米片的表面,并且,复合材料 中石墨烯组分相互铰链形成三维多孔的导电网络.
会议