Radiation tolerance of Ti3SiC2 MAX phases

来源 :第二届中国国际复合材料科技大会 (CCCM-2) | 被引量 : 0次 | 上传用户:chinafeed
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  The ternary layered MAX-phase materials combining the merits of both metals and ceramics are considered as the candidate material for fusion reactor.The different ion beam produced by a tandem accelerator was used to damage the Ti3SiC2 bulks at different temperatures.
其他文献
  以中间相炭微球为碳源,采用凝胶注模工艺制备了多孔炭坯体,通过熔融渗硅制备了C/SiC复合材料;设计了不同固相含量(40wt.%-65wt.%)的中间相炭微球浆料,研究了凝胶注模工艺中固相
  本文采用电沉积的方法将Hummers法制备的氧化石墨烯(G0)还原沉积在金属泡沫镍基底上制备出具有三维介孔结构的还原氧化石墨烯(rGO),并通过第二次电沉积将一层超薄MoO2沉积
  以泡沫铝为夹芯材料,玄武岩纤维和超高分子聚乙烯纤维复合材料为面板,制备夹层结构复合材料。研究了不同纤维类型面板、面板铺层和芯材厚度对泡沫铝夹层结构冲击性能和损伤
  In this study, Ti3C2 nanomaterial and the ultrahigh molecular weight polyethylene (UHMWPE) nanocomposites with Ti3C2 additives were prepared.The morphology
会议
  随着航空、轨道车辆、公共交通等行业的轻量化越来越重视,铝材、有机泡沫和复合材料受到广泛应用,在使用过程中发现,蜂窝结构的材料存在一些缺点,而有机泡沫做夹芯材料,虽然强
  纤维增强复合材料具有轻质、高强、耐蚀、绝缘等性能,在电力行业输配电网络中已有广泛的应用。作者重点综述了纤维增强复合材料在电网中的应用情况,主要包括复合绝缘子、复
  The Gibbs free energy of evaluation of Ag, Cu, and Ce was calculated.The equilibrium oxygen partial pressure of Ag, Cu, and Ce oxide was calculated.The calc
会议
  树脂胶瘤直接决定蜂窝夹层结构复合材料的粘接性能,热压成型工艺中很多因素都会影响胶瘤的形成。传统试验方法在确定蜂窝夹层结构共固化成型工艺条件时需要进行大量探索实
会议
  Dielectric elastomer actuators (DEA) are deformable capacitors capable of high-speed, giant-strain, electrically induced actuation with unprecedented electr
会议
  Owing to the unique nanolaminate crystal structure, the MAX phases offer superior mechanical properties, which make them a potential reinforcement for britt
会议