【摘 要】
：
A study of the electrochemical behavior of CeCl3 in LiCl-KCl molten salt at a Mo electrode or an Al electrode was investigated to ascertain if CeCl3 is a suitable surrogate for PuCl3 in the developmen
【机 构】
：
Fundamental Science on Nuclear Safety and Simulation Technology Laboratory,Harbin Engineering Univer
【出 处】
：
The 2nd China-Japan Academic Symposium on Nuclear Fuel Cycle
论文部分内容阅读
A study of the electrochemical behavior of CeCl3 in LiCl-KCl molten salt at a Mo electrode or an Al electrode was investigated to ascertain if CeCl3 is a suitable surrogate for PuCl3 in the development of nuclear fuel cycle technologies.
其他文献
The novel organic extractant, MIDOA (2,2-(methylimino)bis(N,N-dioctylacetamide)), with high extractability for rare metal ions was microencapsulated by the sol-gel method using alginate polymer matric
Graphite Oxide (GO) was prepared from purified natural graphite by the Hummers method [1].The new solid-phase extraction (SPE) adsorbent (ETA-iGO) was prepared by using tolylene-2,4-diisocyanate (TDI)
In 2011, Chinese Academy of Sciences (CAS), after discontinuing the research and development activity in nuclear energy for decades, started to implement Strategic Priority Research Program "Future Ad
Partitioning and transmutation of long-lived minor actinide (MA) is an option for the future nuclear fuel cycle program to reduce the burden of the high-level radioactive waste and to use the reposito
Molten salts, and particularly molten chlorides, are well known as good reaction media for performing selective solubilization or precipitation in chemical reactions, and have already been proposed as
Chinese Academy of Sciences had launched the "Thorium (Th)-based Molten Salt Reactor Nuclear Energy System (TMSR)" program in the beginning of 2011.
Rare earth elements, especially samarium, because of the big neutron capture section, are harmful for the nuclear fuel cycle [1, 2].Due to the similar properties between lanthanides and actinides, lan
Molten fluorides are of interest because of their efficient use in different industrial processes, in particular in metallurgy and in nuclear energy applications such as the pyrochemical treatment of
Zinc, with the low melting and boiling point, has several advantages when served as the molten cathode[l-3].The present work is devoted to samarium extraction by forming Sm-Zn alloys in LiC1-KCl melt.
Due to their attractive physical and chemical properties, the room-temperature ionic liquids (RTILs) are considered as promising solvents for liquid-liquid extraction of radioactive isotopes in the nu