【摘 要】
：
A parametric steady state simulation model on hollow fiber membrane-based solution heat exchanger(HFM-SHE)is proposed for vapor absorption refrigeration system which uses water-lithium bromide pair.
【机 构】
：
Department or Human and Engineered Environmental studies,Graduate School of Frontier Science,The Uni
【出 处】
：
2016冷冻空调亚洲大会(8th Asian Conference on Refrigeration and Air-c
论文部分内容阅读
A parametric steady state simulation model on hollow fiber membrane-based solution heat exchanger(HFM-SHE)is proposed for vapor absorption refrigeration system which uses water-lithium bromide pair.
其他文献
Recently the undeveloped energy such as waste heat and geothermal energy became one of the recoverable energy sources for the sustainable society.We focused on the Organic Rankine Cycle(ORC)as a waste
We carried out performance evaluation for the Low GWP refrigerant R32/R1234ze(70/30),R410A and R32.We also conducted measuring in cooling operation in case of high outside ambient temperature.
The conventional force circulation heating water storage systems can provide steady heating water flow rate,but it is difficult to keep steady heating water temperature.The indirect circulation heatin
Recently,HFC(hydrofluorocarbon)refrigerants are widely used for refrigeration and air conditioning purposes,however,their global warming potential(GWP)remains a major problem.In the near future,R410A
A compact torsionally oscillating crystal viscometer was used to measure viscosity coefficients of propane.To derive viscosity coefficients,resonance frequencies and bandwidths of the crystal were aut
The data center is employed for storing and managing of different data processingequipments,in which the thermal environment has significant impact on the steady,continuous and safe operation of the f
A purpose of this study is to find out characteristics of heat exchanger tube in evaporator used in triple-absorption chiller.As triple-absorption chiller requires more area than double-effect due to
This study explores the use of Cu plates with machined or finned external surfaces in a partially flooded evaporator.The machined surfaces(finned/grooved surfaces)are intended for the enhancement of h
In order to improve the heat transfer rate of heat exchanger,chiller tested in the present study was coated with FAPO.Water vapor adsorption amount was measured with varying coating thicknesses and bi
In this study,Engineering Equation Solver(EES)program was used to predict the performance of an Absorption Heat Transformer(AHT).AHTs have potential in the use of low-level heat sources such as indust