以牛粪沼气化利用为核心的清洁养殖工艺案例研究

来源 :2010中国可再生能源科技发展大会 | 被引量 : 0次 | 上传用户:fmklsdfjds
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
养殖场沼气工程产出的沼气、沼渣以及沼液均在场区内得以循环利用,具备较好的经济效益。同时,新能源的替代作用产生的环境污染减排效益也十分显著,为该养牛场走可持续发展道路奠定基础。
其他文献
The differential thermal analysis with slow scanning rate is essential and important for the precision determination of phase diagram.It takes the typical application of this method on three systems a
Direct electrochemical extraction of Ti5Si3 from pressed cathode pellets comprising of powdered titanium/silicon-containing metal oxide compounds was investigated by using molten salt electro-deoxidat
High-quality blast furnace carbon blocks should have excellent micro-porous structure, thermal conductivity and anti-molten iron erosion.Effect of TiO2 additions on the properties and microstructures
The important status of guide ring in large power plants and its manufacturing methods were introduced.The advantage of manufacturing method that was the welding combined with electrolysis was discuss
Stretch-forming machine (SFM) for sheet metal is a particularly suited to 3-D curved skins and panels where other forming methods will not achieve proper results.SFM is mainly applied to form aircraft
The aim of this work was to investigate the preparation, the friction and wear properties of the electrolessly-deposited Ni-P-Gr-SiC composites.The effects of the graphite percent, load and rotation s
高压天然气管网中蕴藏着大量的压力能,目前天然气输配工艺中通常采用节流压力调整装置进行节流降压实现天然气从高压管网向低压管网的输配.该输配过程中存在大量的能量损失并且有较大的负效应.本文采用(火用)方法对天然气管网的可用压力能进行了分析,对膨胀透平能量回收技术、城市门站压力能回收透平发电工艺和压力能回收的经济效益进行了探讨.研究结果表明采用透平发电技术回收压力能具有较高的可行性和较大的经济效益.
本文主要针对某地现有地热和热泵机组联合供暖系统存在尾水温度过高、浪费地热资源问题,提出了三种不同的设计方案,并对各方案的能耗、单位面积地热用水量及地热尾水温度进行分析与比较,得出以下结论:降低地热尾水温度,可以提高地热资源的利用率;地热、热泵和调峰锅炉组的供热方案在地热资源不变情况下可以增加供暖面积,但存在一定的环境污染;而利用地热和热泵联合供暖的混水方案会增加投资、但环境效益好等结论.因此在实际
以自制锰源四氧化三锰和碳酸锂为原料,并对原料进行一定的预处理,采用固相合成法合成尖晶石型锰酸锂,通过扫描电子显微镜、X射线衍射的方法研究合成锰酸锂的形貌和结构特征,通过电性能测试研究了锰酸锂正极材料对锂离子电池电性能的影响.结果表明:合成的锰酸锂有良好的尖晶石型结构,颗粒细小、致密、大小分布均匀,电性能优越,且锰源的烧结温度越高、烧结时间越长、球磨时间越长,锰酸锂的电性能越好.
本文对比介绍了几种关于CO2捕集、分离和永久性储存的方法.主要包括:燃烧前捕集、燃烧后烟气捕集和富氧燃烧技术三大类.通过评估各种方法的优缺点,最终提出最经济实用的CO2处理方法.