• 不 限
  • 期刊论文
  • 硕博论文
  • 会议论文
  • 报 纸
  • 英文论文
  2. 您的位置
  3. 首页
  4. 会议论文
  5. Off-Axis Fatigue Strength of Notched Fiber Metal Laminate GLARE-3 and Mechanistic Modeling

Off-Axis Fatigue Strength of Notched Fiber Metal Laminate GLARE-3 and Mechanistic Modeling

来源 :第七届亚澳复合材料会议 | 被引量 : 0次 | 上传用户：pangjunli
【摘 要】
：
The effects of notch size and fiber orientation on the off-axis fatigue strength of the notched fiber metal laminate GLARE-3 are examined.Off-axis fatigue tests are performed on notched (center open h
【作 者】
：
Masamichi Kawai romoya Sato 
【机 构】
：
Department of Engineering Mechanics and Energy,University of Tsukuba,Tsukuba,Japan
【出 处】
：
第七届亚澳复合材料会议
【发表日期】
：
2010年4期
【关键词】
：
Fiber Metal Laminate Off-axis Fatigue Notch Strength Fiber Orientation Dependenc 
下载到本地 , 更方便阅读
下载此文 赞助VIP
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
　　The effects of notch size and fiber orientation on the off-axis fatigue strength of the notched fiber metal laminate GLARE-3 are examined.Off-axis fatigue tests are performed on notched (center open hole) specimens with different fiber orientations.It is clearly observed that the fatigue strength of notched GLARE-3 laminate exhibits not only notch size dependence but also fiber orientation dependence.A new criterion for the fatigue failure of notched orthotropic materials is developed which allows prediction of their fatigue lives for any notch size and for any multiaxial state of stress.
其他文献
Preparation and Characterization of MWCNT/Poly(VB-a) Nanocomposites
A benzoxazine monomer (VB-a) containing an allyl groups was synthesized through the Mannich condensation of bisphenol A, formaldehyde, and allylamine.This monomer was then blended with unmodified, aci
会议
carbon nanotubesnanocompositesthermomechanical propertiesRaman spectroscopy
Preparation and Properties of Carbon Nanotubes/Carbon Fiber Composite Material
In this study, it was modified the functional group onto the surface of carbon nanotubes, and this process for the active chemical reaction with epoxy.The assembly by modifying carbon nanotubes, hybri
会议
Carbon nanotubesCarbon fiberCompositeDamping
A Highly Active Fe-Co Catalyst Supported on Nickel Powder for Hydrogen Generation from Alkaline NaBH
Transition metallic catalysts with high performance and low cost are attractive for portable hydrogen systems using sodium borohydride.The catalyst used in this study is Fe-Co supported on Ni powder.S
会议
Hydrogen generationSodium borohydrideCobaltIron Nickel powder
A Reactive Compatibilizer in Improving the Physical Properties of Multiwall Carbon Nanotube/Nylon 6
A novel approach was proposed to prepare the multiwall carbon nanotube(MWNT) / nylon 6 resin nanocomposite with the aid of free radical reaction.A reactive compatibilizer, polyolefin grafted maleic an
会议
CompatibilizerCarbon nanotubesNylon 6Nanocomposites
The Effect of Heat Treatment on the Compressive Mechanical Properties of Carbon/Phenolic Resin Ablat
Ablator material for thermal protection system of re-entry capsules and nozzles is often made by carbon/phenolic resin composites.For weight saving, the ablator material are now expected to use as a s
会议
Rayon based carbon fiberPhenolic resinAblatorCompression test
Characterization of Fatigue Damage of Orthotropic CF/NY6 Laminates Through Thermoelastic Stress Anal
As an automotive lightening material, CFRP is widely noticed.In especial, CF/thermoplastic composites get much attention because of the material recyclability.On the other hand, we experience that CF
会议
fatigue damagestitched carbon fiber/Nylon-6 laminatesthermoelastic stress anal
Energy Dissipation of CFRP-Kevlar Hybrid Composites Shield for Space Use
In the study, high evergy abosorbing shielding system was studied to protect space crafts from the hypervelocity impact of space debris and micrometeoroids.CFRP-Kevlar hybrid composites were suggested
会议
compositehypervelocity impactspace debrismicrometeoroidshielding
Restraining Effects of Transverse Cracking in 90° Layer of Thin-Ply CFRP Cross-Ply Laminates
It is generally known that the crack initiation strain is increased with thinner 90° layer.However the mechanism has not been well clarified in the case of very thin thickness as thin as 40μm.A system
会议
Thin-plyCross-ply laminatesTransverse CrackEnergy release rateDamage growth
Damage Progress and Failure of Impact Damaged Composite Laminate under Compressive Load
Mechanism of compressive property reduction of quasi-isotropic composite laminated plates due to transverse impact is studied numerically and experimentally.The deformation profiles, damage progress a
会议
CompressionBucklingImpact DamageEnergy Release Rate
Influence of Speed on the Crushing Behavior of Composite Plates
This paper presents a study on crushing of CFRP composite laminated plates.The objective of this study is to analyze the influence of crushing speed on the rupture behavior and the energy absorption c
会议
Compositecrushingenergy absorptionspeedCFRP