High Strain Rate Testing of Glass-Epoxy and Hybrid Laminates

来源 :第二届中国国际复合材料科技大会 (CCCM-2) | 被引量 : 0次 | 上传用户：q3324079

【摘要】

：

To accurately simulate the response of a structure in high-speed crash and impact events, such as bird-strike, the strain-rate dependency of the materials should be considered.Explicit finite element

【作者】

：

Zhibin Wu Andrew J.Gunnion Rodney S.Thomson Hannes Koerber Chunyan Song

【机构】

：

Shanghai Aircraft Design Research Institute (SADRI),Commercial Aircraft Corporation of China (COMAC)

【出处】

：

第二届中国国际复合材料科技大会 (CCCM-2)

【发表日期】

：

2015年7期

下载到本地 , 更方便阅读

下载此文赞助VIP

声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架

论文部分内容阅读

　　To accurately simulate the response of a structure in high-speed crash and impact events, such as bird-strike, the strain-rate dependency of the materials should be considered.Explicit finite element tools used to simulate such events have the capability to model strain-rate dependent material behaviour.

其他文献

适用于汽车部件RTM快速成型的环氧树脂体系的研究

本文采用二乙烯三胺、异佛尔酮二胺、1,3-二(氨甲基)环己烷、自制潜伏性固化剂及促进剂,制备了三种适用于树脂传递模塑成型(RTM)的中温快速固化的环氧树脂体系,并对其工艺特性及力学性能进行了系统研究。研究结果表明,三种环氧树脂体系最佳注射温度60-80℃,70℃下的适用期分别为8min、15min、25min,可实现130℃下5min内快速固化,浇注体力学性能优异,与碳纤维匹配性好,可满足汽车部件

会议

汽车部件环氧树脂树脂传递模塑成型(RTM)碳纤维

A Calculation for Equivalent Parameters Sandwich Plate System Reinforced by Cross Wall in the Core

Sandwich plate system (SPS) is a new kind of sandwich composite structure which used in shipbuilding and bridge construction.A series of equivalent methods are described discussed for SPS with cross w

会议

Sandwich plate systemEquivalent modulesFEMstiffness coefficientscross wall

The effect of initial ovality on the tension stiffness of helical structure

Offshore pipeline has a high level of bending deformation because of helical structure.The production process and the external loads can cause a cross-section ovalization.To predict the tension stiffn

会议

Review on multi-scale structural design of submarine acoustic stealth composite

Research on the acoustic stealth structures of submarines primarily strives for low frequency, pressure resistance, and broad frequency domain absorption.The high-quality acoustic stealth coating on s

会议

submarine anechoic tilemulti-scalestructure designsound absorption mechanism

Performance studies on bolted joints of composite laminates with local reinforcement

In this paper, four types of local reinforcement schemes used in composite laminates bolted joints were studied.Through numerical method, a 3-D progressive failure analysis was implemented to analyze

会议

fiber reinforced polymer compositesbolted jointslocal reinforcement

An optimal method for the determination of parameter in Sun-Chen's one-parameter plasticity mod

In the description of nonlinear response of fiber-reinforced composites, the one-parameter plasticity model developed by Sun and Chen is the simplest one, including a single parameter that indicates t

会议

fiber reinforced compositenonlinear behaviorone-parameter plasticity modelopt

基于扩展有限元方法的复合材料层压板分层扩展模拟

分层是复合材料层压板中一种较为常见的失效形式，能够导致层压板过早屈曲、过度振动、吸湿、刚度折减以及寿命下降等负面后果。在层压板分层扩展模拟研究中，学者常采用内聚力单元模拟(CZM)或虚拟裂纹闭合技术(VCCT)等方法。但是CZM和VCCT仅适用于扩展路径已知的自相似裂纹扩展，如单向层压板分层，而无法揭示多向层压板中更为复杂的分层现象。

会议

分层扩展有限元裂纹扩展分层迁移

Influence of adding nickel powder to the surface of composites on the adhesion strength of the subst

MetallizationFRP composites have broadened their applications for functional purposes.The adhesive quality of the coating has significant influence on the performance and service life.Many remarkable

会议

Metallization FRPImproving adhesion strengthSurface modificationNickel powder

Acoustic emission response and micro-deformation behavior for compressive buckling failure of multi-

Accurate characterization of delamination damage and evolution plays a significant role in studying failure behaviors of composite laminates.In the present paper, acoustic emission (AE) and digital im

会议

Reinforcement Effects of Aluminum-lithium Alloy on the Mechanical Properties of Novel Fiber Metal La

The novel fiber metal laminates based on aluminum-lithium alloy (NFMLs) were investigated to improve the stiffness and damage tolerance.The aluminum-lithium sheets were rolled from 2 mm to 0.3mm by co

会议

fiber metal laminatesaluminum-lithium alloypreparationproperties

High Strain Rate Testing of Glass-Epoxy and Hybrid Laminates

其他学术论文