High-Power Spin Transfer Nano-oscillators

来源 :第十三届全国低温物理学术讨论会 | 被引量 : 0次 | 上传用户:bbs_zj
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  Spin transfer nano-oscillators (STNOs) based on spin transfertorque have attracted intense attention due to their potential applicationsin microwave source and wireless microwave communications because of their uniquecharacteristic such as simple structure, nanoscale size, frequency agile, and easyintegration.Recently, we studied the microwave emission in CoFeB-MgO magnetic tunnel junction with perpendicular magnetic anisotropy.The results show that the STNO based on such structure has a low critical current density of less than 0.6 MA/cm2 and excellent microwave properties without applied magnetic field: the measured output power is 18 nWwith a narrow linewidth of 73 MHz at an applied dc current of 0.3 mA.These results suggest the STNO with perpendicular magnetic anisotropy is promising for developing high-power nanoscale radio-frequency devices.
其他文献
采用CFD数值模拟的方法对某款汽车的排气系统进行仿真建模,并通过台架试验验证仿真模型的可行性.在此基础上对排气系统进行结构优化,以降低整个排气系统的排气背压,提升发动
连续管在钻井过程中易发生正弦及螺旋失稳,由此引起的附加摩阻将影响连续管在定向井中的通过和作业能力,严重时导致无法加压.依据连续管的变形条件,推导出连续管变形的挠度方
针对重载货运专线——大秦铁路道岔辙叉磨耗问题,应用有限元方法来求解车轮与辙叉的接触问题,建立不同车轮与标准和磨耗后的12号道岔辙叉接触模型,标准轨部分采用75 kg/m钢轨
为准确描述载荷特征、预测疲劳载荷,并合理地解释飞机结构疲劳载荷的不确定性,对疲劳损伤进行了预测.提出应用自回归滑动平均模型(ARMA)方法描述疲劳载荷的历程,给出了模型的
任意线性结构实际可控时需要的执行器的最小数量及其位置已经可以求得,但有时会发生控制输出力远远大于执行器的执行力范围的问题.为了解决此问题,综合运用了松弛组合近似法
发动机悬置系统的扭矩轴解耦方法(TRADM)考虑质量、刚度以及扭矩的影响,对该系统进行优化,以实现单个激励力只激励出一个模态.针对某新型轿车悬置系统采用传统的不考虑阻尼的
The control of the spin diffusion length could be of great importance for the operation of devices based on the electric field manipulation and transport of ele
会议
基于Gauss-Chebyshev积分,提出了工程结构的模糊可靠性分析方法.首先,研究了强度为模糊变量,应力为随机变量时工程结构的模糊可靠性,利用Gauss-Chebyshev积分,将结构模糊失效
会议
自从在Co/Cu颗粒膜中发现巨磁电阻效应以来,由于其简单的制备工艺以及在自旋电子器件中潜在的应用引起了人们的广泛关注。笔者研究了有关于超薄磁性金属/半导体薄膜的性质,通