【摘 要】
：
The composite spun yarns consisting of core filament and staple fibers on the surface have typically used in multifunctional purposes such as high tenacity, skin-friendly surface, thermal insulation a
【机 构】
：
Dept.of Advanced Organic Materials and Textile System Engineering, Chungnam National University, Kor
【出 处】
：
The 12th Asian Textile Conference (第12届亚洲纺织会议暨2013年纺织学术年会)
论文部分内容阅读
The composite spun yarns consisting of core filament and staple fibers on the surface have typically used in multifunctional purposes such as high tenacity, skin-friendly surface, thermal insulation and good tactile handle, etc.
其他文献
Along with the advance of integration of textile and garment, felt products for its characteristics of short process flow, and non-woven properties, more and more were used in clothing, home textiles,
Weft insertion by air-jet loom is a complicated movement, which is not a fully controlled technological process.In this type of loom, freedom of the filling to untwist during insertion results in twis
The loose soils from mountainsides may cause mudslides after the occurrence of torrential rains or typhoons.Mudslides cause heavy treasury loss and wound-and-death tolls;therefore, studies on effectiv
Hairiness is one the most important parameters affecting all the latest process after spinning.Hairiness more than desired and appropriate value causes a lot of difficulty in all the further process.M
when observing a relation between beat-up force and warp tension by using computer analysis program, as a result of analyzing after giving warp tension variation by gradually increasing tensile streng
There have been growing interests in needleless electrospinning, as an alternative method of needle electrospinning.Generally, needleless electrospun fibers have relatively larger and less even diamet
This study surveys the weavability of technical fabrics according to the fabric cover factor and loom characteristics such as weaving speed, shedding angle and setting warp tension using aramid filame
Low-temperature pyrolysis was conducted to remove jute fibers non-cellulosic compounds, which mainly have undesirable hydrophilic nature of jute fibers for reinforcement application.
This paper investigates the physical properties of 100％ micro modal yams and its knitted fabrics spun by ring, siro spun, compact and air vortex spinning machines.
This paper reports how the yarn surface friction in the influence of fabric mechanical properties.Fabric was treated by various types of chemicals.