论文部分内容阅读
The extraction of copper from Cu-Co-Ni sulfate solution in a continuous scale mixer settler was investigated in this study.
Solvent Extraction of Copper from Cu-Co-Ni Sulfate Solution using Mixer-Settler
【摘 要】
：
The extraction of copper from Cu-Co-Ni sulfate solution in a continuous scale mixer settler was investigated in this study.
【机 构】
：
MineralResourcesResearchDivision,KoreaInstituteofGeoscienceandMineralResources,Daejeon,RepublicofKor
【出 处】
：
The 12th International Symposium on East Asian Recycling Tec
【发表日期】
：
2013年11期
其他文献
From the fundamental solution on the environmental pollution and resource recycling of carbide slag,the mineralogical researches were carried using XRD,XRF,
A glycine modified persimmon powder was used as biosorbent for platinum adsorption in aqueous solution.
Its hard to use traditional methodstoseparate Sn-Pb-Sb alloys which come from metallurgy process of tin,lead,copper and recycling process of tin secondary r
The dispersive high-quality spherical silver powder was prepared by ascorbic acid reduction of silver nitrate,which was recovered from silver waste.
Phase Transformation and Hydration Crystallization Growth for the Separation of Calcium in Sulfidize
Tons of neutralization sludge(NS)is generated every year during the conventional lime-neutralization process.
It has been known that there are large amount of nitric acid and valuable metals,e.g.,copper and nickel,etc,in the plating waste solution of automobile whee
Converter steel slag is the waste residue generated by steel making process.Production of 1 ton of steel produces about 0.15 tons of steel slag.The global a
Using blister refining Cobalt-rich slag as raw material,the leach liquor was obtained by sulphuric acid oxidation leaching,and Co3O4 powders was prepared by
Use of Ti-bearing Blast Furnace Slag for Fabrication of Multi-doped Aluminum Titanate Composites and
A simple approach for fabrication of multi-doped aluminum titanate composites from Ti-bearing blast furnace slag(Ti-slag)is described.
The objective of the present study is aimed to investigate for the extraction of cobalt from Co-Ni sulfate solution in a continuous scale mixer settler at t