氮掺杂浓度对6H-SiC热氧化速率的影响

来源 :第十八届全国半导体集成电路、硅材料学术会议 | 被引量 : 0次 | 上传用户:zhouyong910
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
本文研究了在不同浓度氮(N)掺杂对6H-SiC热氧化速率的影响,掺杂浓度分别为9.53×1016cm-3、1.44×1017cm-3、2.68×1018cm-3.在干氧条件下,分别在1050℃和1150℃温度下,氧化2、4、6、8、10个小时.随后用椭偏仪对样品的氧化薄膜厚度进行测试,并利用修正的Deal-Grove模型,提取出线性氧化速率和抛物线氧化速率.结果表明,随着N元素浓度的增加,6H-SiC的热氧化速度逐渐加快.
其他文献
磁共振方式的无线能量传输(WPT),传输距离可从数厘米到数米,传输效率可达到90%以上,传输功率可从数W到千瓦级,是目前无线能量传输的研究热点.本文对磁共振方式的WPT系统结构,
  A new method based on memetic algorithm (MA) to optimize the particle filter (PF) is proposed in this paper.The particle filter is typically crucial to deal
  Projected capacitive touch sensing is the first choice in smartphone and tablet market,and noise mitigation is the main obstacle in product development.Trad
  The combination of Reed-Solomon Code (RS-Code) and Convolution Code (CC-Code) is widely used for detection and error correction of channel encoding in tradi
会议
本文研究空间合作目标交会对接时相对位置和姿态耦合控制问题的建模和控制问题.以相对位置和姿态误差为变量,引入推力作用点的偏心距来定量描述姿态控制和轨道控制间的耦合,
针对表面肌电信号非线性和非平稳的特点,提出了一种核主元分析与线性判别分析相结合的表面肌电信号特征识别新方法.首先通过虚拟仪器采集桡侧腕屈肌和肱桡肌两路表面肌电信号
  The SaaS multi-tenant data stored in shared schema must be reasonably placed on multiple nodes in cloud environment,to ensure the load balance of the nodes
利用改进的刻蚀工艺实现了无微沟槽、侧壁近似垂直的刻蚀台面形貌,并在此基础上制造了单MESA结构的4H-SiC PiN二级管.器件外延的漂移层厚度为15μm.直流测试结果显示,器件的
  A k-total coloring of a graph G is a map σ: V (G)∪E(G)→{1,2,...,k} such that no two adjacent or incident elements of V(G)∪E(G) receive the same color.Th
随着芯片设计制造全球化进程不断深化,设计制造分离,硬件外包,硬件木马的植入变得越来越容易,芯片安全受到极大威胁.本文介绍了一种基于有限状态机(FSM)的抗硬件木马电路模糊