Grey Target Evaluation and Mechanism of Cold Recycled Asphalt Mixture with Comprehensive Performance

来源 :2017年世界交通运输大会 | 被引量 : 0次 | 上传用户:meimeilaile
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  Aiming to improve the pavement performance of emulsified asphalt cold recycled mixture in hot and rainy areas,the effect of emulsified asphalt content,cement content and Reclaimed Asphalt Pavement(RAP)content on high temperature performance,moisture stability and fatigue properties of cold recycled mixture were investigated.
其他文献
  为适应四川省川西高寒高海拔地区高速公路沥青路面建设的需要,研发了高低温性能优异兼具温拌效果的宽温域温拌改性沥青。通过沥青常规指标、PG 分级、多应力重复蠕变恢复
  To study the influence of confining pressure on the evolution and distribution of force chains among the particles within bonded granular material from a me
  为探索贝雷法在半刚性基层中的应用,补充骨架密实型配合比中Coarse AggregateRation(CA)值的范围,设计了两种均为“S”型的骨架密实型配合比。通过室内试验,对比静压成型时
  Waste engine oil(WEO)is a waste material from vehicles which has been driving about 5000 kilometers.The objective of this study is to investigate the effect
  为探究细观尺度下沥青混合料抵抗低温开裂的决定性因素,以沥青砂浆作为研究对象,采用弯曲流变仪来评价其低温性能;由于季冻区沥青路面冻融现象频发,本文引入了沥青砂浆冻融循
  Novel intercalated polymers(OMMT/asphalt anti-stripping agent,short for MAS)as anti-stripping agents were prepared in our lab serving for acidic aggregate a
  3D 打印技术是一种新型制造工艺。本文首先简要介绍了目前主流的3D 打印技术以及对应的优缺点。其次,根据其技术特点简要分析了3D 打印技术在路面工程中可能具备的优势,以
  The g-C3N4/TiO2 composite photocatalysts were prepared by directly calcining the mixtures of melamine and TiO2,and the samples were characterized by X-ray d
  Structure and performance characteristics study of light colored asphalt was few,although light color asphalt had been widely used in China.A representative
  为了分析铺设2.5cmECA-10 罩面的SMA-13 上面层采用就地热再生技术进行养护维修的可行性,采用室内试验和工程实践相结合的方法,基于6.5cm 翻松深度,设计了复拌再生和加铺再