【摘 要】
：
Studies have been carried out to determine maximum recovery of Co, Mn and Zn from zinc plant residue in H2O2-H2SO4-H2O solutions.Hydrogen per oxide is used as a reductive agent.The leaching parameters
【机 构】
：
Materials and Energy Research Center, P.O.Box 14155-4777, Tehran, Iran;R&D Center, Iranian Zinc Mine
【出 处】
：
第五届国际湿法冶金学术会议(5th International Conference on Hydrometallurg
论文部分内容阅读
Studies have been carried out to determine maximum recovery of Co, Mn and Zn from zinc plant residue in H2O2-H2SO4-H2O solutions.Hydrogen per oxide is used as a reductive agent.The leaching parameters such as sulphuric acid concentration, solid to liquid ratio, time and amount of hydrogen per oxide were varied to study their effect on metal extraction.The optimum conditions established were as follows: 20 gr/lit sulphuric acid, S/L of 1∶10, 3 %(V/V) hydrogen per oxide and ambient temperature.Under these conditions, more than 90% of Co, Mn and Zn could be extracted within 20 min.Also,"Extraction procedure tests" approved by EPA were applied to the residue to determine the amount of released metals and were compared with toxicity limits given by EPA for the solid wastes.
其他文献
Titanium dioxide (TiO2), a well-known wide gap semiconductor, has attracted a lot of interests in applications such as sensors, photocatalysis and photoelectrochemical ceils because of its advantages,
Dewaxing process is an effective approach to lower the solidification point of various petroleum distillates.The catalysts containing ZSM-5 zeolite are widely applied to this process.The small 10-ring
Flame aerosol synthesis which has many advantages, such as scalable, continuous, without post-treatment and low cost, has become an established way to routinely produce variety of commodities like car
Although the photosensitized oxidation has been found many synthetic applications, regio-and stereo selectivity controls are still difficult issues.Indeed selective oxidation of alkenes by molecular o
Black shales contain economically significant concentrations of metals, such as Mo, Ni, et al.During the process of treatment of Mo, nickel is enriched into the metalliferous black shales residues.The
The main purpose of this study was to characterize and to extract bismuth from a low grade bismuth glance floatation concentrate.The physical, chemical and mineralogical characterization of the flotat
Liquid-liquid extraction (LLE), also called solvent extraction (SX), is a process that allows the separation of two or more components due to their unequal solubilities in two immiscible liquid phases
Anhydrous magnesium chloride, the dehydration product from magnesium chloride hydrate(MgCl2·nH2O), is a conventional raw material to prepare electrolytic magnesium.Because the dehydration of magnesium
An experimental investigation is presented on Ti (Ⅳ) extraction from acidic sulfate solutions using trialkylphosphine oxide (TRPO) in dodecane as an extractant.The effects of H2SO4 concentration, TRPO
The extraction of zinc from ammoniacal solutions of ammonium chloride using 1-Phenyl-4-ethyl-1,3-octadione (a sterically hindered β-diketone) as extractant has been investigated as a function of phase