【摘 要】
：
The agglomeration and leakage of fillers will hinder the development of the antimicrobial membranes to a large extent.In this study, novel Cu2O nanowires/PSF membrane prepared by dispersing one-dimens
【机 构】
：
Institute of Oceanic and Environmental Chemical Engineering, College of Chemical Engineering and Mat
【出 处】
：
海峡两岸第五届膜科学技术高级研讨会暨“青山杯”研究生论坛
论文部分内容阅读
The agglomeration and leakage of fillers will hinder the development of the antimicrobial membranes to a large extent.In this study, novel Cu2O nanowires/PSF membrane prepared by dispersing one-dimensional Cu2O nanowires in PSF casting solutions and Ag-Cu2O nanowires/PSF membrane prepared by mixing the silver nanoparticles coated Cu2O nanowires into the polymer phase have been designed and developed.The antimicrobial and permeability properties of blended membranes were significantly enhanced by the addition of nanowires with little Cu and Ag ions leakage.
其他文献
锂离子电池在高温环境下工作的安全问题受到了研究者的广泛关注.改善锂离子电池隔膜的热稳定性能够有效提升锂离子电池的安全性.使用多巴胺与聚乙烯亚胺共沉积方法对聚丙烯锂离子电池隔膜进行改性,并进一步诱导了二氧化锆纳米粒子在该隔膜表面的生成.该二氧化锆纳米粒子修饰的隔膜具有优异的热稳定性.通过二氧化锆纳米粒子修饰,聚丙烯隔膜在140℃下处理1h后的热收缩率由62.4％降低至9.4％.除此之外,隔膜的电导率
Metal based gel as versatile precursor was first employed to prepare stiff and integrated MOF/polymer membranes.The metal based gel was completely impregnated in/on polymer substrates, and resulted in
For porous membranes, overcoming the trade-off between membrane flux and mechanical strength has always been a hot topic.In this study, a simple and practicable approach is explored to fabricate a sup
盐酸羟胺是一种重要的化工产品,在化工、医药等诸多行业均有广泛的应用.传统生产工艺普遍存在工艺复杂、成本高、后处理麻烦、收率低等问题.而酮肟水解反应是一种常见盐酸羟胺合成方法,因反应是一个热力学受限反应,反应的平衡转化率较低,所以一直没有得到应用.本课题组将肟水解反应与膜分离强化技术相结合提出肟水解反应-膜分离耦合生产盐酸羟胺的工艺路线,通过在线移除酮,提高了肟水解的转化率.针对肟水解反应液涉及较高
采用层层自组装技术制备聚电解质纳滤膜具有广阔的应用前景,但基于静电作用的聚电解质多层膜在酸碱条件下的稳定性仍有待于提高.本研究在自组装过程中引入氧化石墨烯(GO)片层作为组装材料,制备了PDDA/GO复合膜，并用于水体中染料的脱除.通过改变操作条件或对膜进行酸/碱/氧化剂预处理,考察膜的性能稳定性.通过与纯聚电解质膜进行对比,表明GO的引入能够改变膜的结构并提高其分离性能和稳定性.因此采用GO层层
Poly(L-lactide) (PLLA)/TiO2 composite membranes were fabricated by immersion precipitation method.The membranes were characterized using various methods including XRD, ATR-FTIR, TGA, DSC, SEM and wate
苯胺废水的处理以及温室气体的控制是当今两个个重要的话题,在此引入一个新型的双极膜电渗工艺用于同时实现苯胺的去除以及温室气体二氧化碳的捕捉.首先,在电中性条件下苯胺不带电,此时利用双极膜电渗析实现了盐和苯胺的分离,脱盐率高于96.51％;然后向料液室通入二氧化碳,使得料液室中的苯胺离子化并实现二氧化碳的捕捉;最后,进行双极膜电渗析,去除了料液室的苯胺(去除率高于98.68％),并在酸室获得释放出来实
N-halamine precursor P(ADMH-co-VAm) was used to improve thin-film-composite polyamide (PA) reverse osmosis (RO) membrane antibacterial and chlorine resistance properties through second interfacial pol
采用α-环糊精(α-CD)、γ-环糊精(γ-CD)、羟丙基-β-环糊精(HP-β-CD)与水性聚氨酯(WPU)共混制备改性水性聚氨酯(WPU)渗透汽化膜,采用红外光谱、扫描电镜(SEM)、差示扫描量热(DSC)、溶胀、渗透汽化(PV)等表征.结果表明,膜红外谱图中出现了环糊精的特征吸收峰;膜的SEM断面粗糙度增加,发生了团聚现象;α-CD/WPU膜、γ-CD/WPU膜和HP-β-CD/WPU膜的玻
分别采用甲基丙烯酸甲酯(MMA)、甲基丙烯酸丁酯(BMA)、甲基丙烯酸十二烷基酯(DMA)与带有双键封端的水性聚氨酯进行共聚,制得甲基丙烯酸酯改性水性聚氨酯(WPUA)乳液,采用浇注法制得WPUA膜,合成了系列不同烷基侧链甲基丙烯酸酯共聚改性水性聚氨酯膜.改性后膜的热稳定性随着侧链增长而增大;对WPUA膜渗透汽化苯/环己烷(5/95w/w)混合液结果表明:随着甲基丙烯酸酯共聚物侧链增长,渗透通量提