锂离子电池用高容量柔性红磷复合负极

来源 :第十八次全国电化学大会 | 被引量 : 0次 | 上传用户：tony_tang

【摘要】

：

能源问题是当今社会可持续发展的关键.二次电化学储能系统是提高能源利用效率的重要途径.锂离子电池具有高能量密度、高工作电压、循环寿命长等优势,在电子产品、电动汽车等众多市场有广泛的需求和应用前景.同时,轻、薄、可穿戴、柔性电子器件等概念的提出极大地拓宽了未来电子产品市场的需求,也对传统便携式储能系统提出新的挑战.目前锂离子电池具有成熟的技术基础,若能在此之上实现锂离子电池构造由刚性到柔性的转化,将极

【作者】

：

张泽文彭翃杰黄佳琦朱林张强

【机构】

：

清华大学材料学院,北京，100084 清华大学化学工程系绿色反应工程与工艺北京市重点实验室,北京,

【出处】

：

第十八次全国电化学大会

【发表日期】

：

2015年7期

下载到本地 , 更方便阅读

下载此文赞助VIP

声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架

论文部分内容阅读

其他文献

synthesis and electrochemical performances of Cu2ZnSnS4(CZTS)micro-spheres for lithium-ion battery a

Lithium-ion batteries are widely used in modern instruments and devices because of their long lifetime,environmental benignity and high energy density.In recent years,intensive research has been condu

会议

Scalable and Economical Fabrication of Porous Silicon@carbon Composite with a High Conversion Yield

Despite most porous silicon-based anode materials manifest excellent lithium-ions storage properties and have great potential application in the next generation lithium-ion batteries,the scalable and

会议

复合铁氧体锂离子电池负极材料的合成及电化学性能研究

目前商业化锂离子电池负极材料多使用石墨类碳材料,由于受到材料比容量低的限制(石墨类碳材料的理论容量仅为372mAh/g),不能满足高容量锂离子电池的需求.过渡金属氧化物具有较高的可逆比容量( 500-1OOOmAh/g),作为锂离子电池负极材料早有研究,但工作电压较高.复合过渡金属氧化物能综合运用各种单一过渡金属氧化物的电化学活性,很有可能成为下一代极具潜力的高比能量、高比功率锂离子电池负极材料[

会议

Single-crystal Mini-hollow Polyhedron Mn2O3 Derived from MOFs as High-Performance Lithium Anode Mate

As the increasing demands for large-scale energy applications such as electric vehicles(EVs) and hybrid electric vehicles(HEVs),it is critical to develop electrodes with high capacity and rate capabil

会议

Relative humidity and temperaturedependence of mechanical degradation ofnatural fiber composites:The

Natural fiber reinforced composites undergo remarkable mechanical degradation with large amounts of moisture absorption.Existing experimental evidence shows that such mechanical degradation largely de

会议

natural fibermoisture absorptionmechanical degradationtemperaturerelativehum

A highly efficient prediction of loaddistribution inmulti-bolted composite joint

This paper presents the development of a highly efficient method for analyzing load distributions in multi-bolted composite joint using 2D-FE model.In the model, the bolt was modeledby using a fastene

会议

compositebolted jointload transferp-version finite element

Research on effect of stiffeners on the buckling performance of composite rearpressure bulkhead for

In this paper, the research on structure buckling performance due to stiffeners on the composite domed rear pressure bulkhead of civil aircraft is finished.According to establish two categories struct

会议

Composite rear pressure bulkheadhat-shape stiffenerbuckling analysis

Analysis and test verification of stability onsinglecomposite stiffened component subjectedtocompres

Composite stiffened panels is easy to lose stability on the compression loading, the composite stiffened component is very important for loading transfer as the key components of composite stiffened p

会议

single composite stiffened componentcompression stabilitybucklingpost-bucklin

Macroscopic and microscopic residualstresses in frictionstir welded particlereinforced metal matrix

Residual stresses in friction stir welded (FSWed) particle reinforced metal matrix composites (PRMMC) affect the dimensions, the shapes and the performances of the FSWed joints significantly.However,

会议

metal matrix compositesfriction stir weldingresidual stressmultiscale simulat

铁掺杂的铝/碳负极材料的电化学性能研究

以微米级铝粉、膨胀石墨、二茂铁为原料,通过高温固相法制备不同铝含量的铁掺杂的铝/碳复合材料,其中铝的含量分别为28％,47％,50％.采用X射线衍射(XRD)、扫描电子显微镜(SEM)对铁掺杂的铝/碳复合材料的物相和形貌进行表征.同时,将样品制备成电极并组装成锂离子电池,并对电池进行循环性能测试、循环伏安和交流阻抗等测试来检测样品的电化学性能.以上测试结果表明,当铝的包覆量为47％时,超薄的膨胀石

会议

锂离子电池用高容量柔性红磷复合负极

其他学术论文