【摘 要】
：
Photocatalysis is a promising technology for addressing energy and environmental problems.However,traditional photocatalysts have low efficiency as they suffer from poor stability or fast recombinatio
【机 构】
：
Department of Chemistry,The Chinese University of Hong Kong,Shatin,New Territories,Hong Kong,China
【出 处】
：
第十四届全国太阳能光化学与光催化学术会议
论文部分内容阅读
Photocatalysis is a promising technology for addressing energy and environmental problems.However,traditional photocatalysts have low efficiency as they suffer from poor stability or fast recombination of excitons.Metal-organic frameworks(MOFs)might be a possible solution because of their large surface areas and downsized catalytic centers.[1] Metal-organic frameworks(MOFs)are a class of crystalline microporous materials consisting of metal ions or clusters coordinated to organic molecules.[2] The structure bears well-defined channels and rich functionalities.MOFs,such as ZIF-8 and HKUST-1,have been used for gas separation and catalysis.[3] However,the potential of MOFs in photocatalytic reaction has hardly been explored.In this work,new composites of MOFs and photocatalysts were synthesized.The photocatalytic activity was found to be enhanced for degradation of organic compounds as well as hydrogen evolution from water.The improvement was believed to be due to the separation of electrons and holes,large surface area and active catalytic sites on the MOF.
其他文献
BaTi4O9 with a tilted octrahedra structure possesses excellent dielectric or photocatalytic performances.In this work,a modified polyacrylamide gel precursor process was presented to synthesize BaTi4O
TiO2 因其具有优良的光催化性能,在环境有机污染物去除、光分解制氢等领域具有广阔的应用前景,因而在过去的几十年里,成为最受亲睐的光催化材料。然而,TiO2 光响应限于仅占太阳光总能量4％的紫外光,光量子产率低(一般低于10％),这些局限性制约了它更广泛的实际应用。为此,人们对TiO2 改性进行了很多探索性研究,目前主要通过过渡金属离子和一些非金属离子掺杂、贵金属和窄带隙半导体材料与其复合等方法实
目前中国正面临着严重的大气污染问题,PM2.5 严重超标影响着人们的身体健康,而其中VOC 是生成PM2.5 的主要来源,因此要从根本上解决大气污染问题,VOC 的降解是重中之重.
In our previous work,various silica nanolayers (SNLs)-supported TiO2 photocatalysts are prepared from immobilization of TiO2 nanoparticles onto the surface of SNLs derived from vermiculite.
利用直接沉淀法,制备得到复合光催化剂(ZnO@CdS)。以罗丹明B(Rhodamine B,RhB)为目标化合物及ZnO为对照光催化剂,研究可见光光催化降解特性。结果表明催化剂在可见光区的吸收都有一定加强,能够在更短的时间里实现对RhB的降解,ZnO@CdS对RhB有较好的矿化能力。
近年来,半导体光催化氧化还原在有机合成反应中的应用收到了研究者的广泛关注[1,2].其中,通过光催化氧化可以将醇氧化至相应的醛是目前的研究热点之一.但是,对于醇到醛的氧化,TiO2 等常用的光催化材料由于氧化性太强,目标产物的选择性偏低.此外,产物的选择性还受到反应工艺条件等因素的影响.本论文开发了Ag/AgBr@TiO2 核壳结构光催化剂,研究了催化剂复合结构以及反应时间、光源等工艺条件对苯甲醇
钙钛矿结构的光吸收材料CH3NH3PbX3 应用到太阳能电池中,被称作钙钛矿太阳能电池,具有高效率、高开路电压的特点,成为新一代薄膜太阳能电池.目前,钙钛矿太阳能电池效率已经超过15％.[1-2 在进一步提高电池效率的同时,还需要解决成本问题,为将来电池的实用化奠定基础.其中,影响电池成本的关键因素之一是目前在这类型太阳能电池中广泛应用的spiro-OMeTAD 空穴传输材料(HTM),主要是因为
钙钛矿太阳能电池以其直接带隙、高光吸收系数及高载流子迁移率受到越来越多的关注.尤其在近两年，这类电池发展迅速，效率已超过15％，可谓潜力无限.[1-2]在钙钛矿太阳能电池中用到一种名为spiro-OMeTAD 的明星空穴传输材料，因其结构中含有螺双芴结构而使其合成极为复杂化，价格也变得相当昂贵，不利于钙钛矿型太阳能电池未来实用化发展.为此，人们尝试采用不同类型的空穴传输材料来替换spiro-OMe
全世界目前面临着严重的能源危机,各种传统能源将被消耗殆尽,开发和利用各种新型能源已成为当今时代的主题,氢能源有着储量丰富、高效、清洁、便于运输等优点,因而在新能源的发展中受到越来越多的关注,其中通过光催化分解水将太阳能转化为氢能是获得廉价氢气最有前途的方法之一,已成为国内外研究的热点.
Titanium dioxide is the basis of many photocatalytic systems and its photocatalytic activity has been widely used in various fields ranging from the environment and renewable energy sectors [1]However