Carbon Nanotube Decorated with Silver Nanoparticles and its electromagnetic Wave Absorption Properti

来源 :The 11th China-Japan joint conference on Composite Materials | 被引量 : 0次 | 上传用户：lfszlfs2009

【摘要】

：

Silver (Ag) nanoparticles were fabricated by chemical reduction process,and then the Ag nanoparticles were grafted onto the surface of carbon nanotubes (CNTs) to prepare hybrid nanocomposites.

【作者】

：

Toshiaki Natsuki Yusuke Suzuki Gan Jet Hong Melvin Qing-Qing Ni

【机构】

：

Department of Functional Machinery and Mechanics,Shinshu University,Tokida,Ueda 386-8576,Japan

【出处】

：

The 11th China-Japan joint conference on Composite Materials

【发表日期】

：

2014年3期

【关键词】

：

Silver nanoparticles Carbon nanotubes Microwave absorber

下载到本地 , 更方便阅读

下载此文赞助VIP

声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架

论文部分内容阅读

　　Silver (Ag) nanoparticles were fabricated by chemical reduction process,and then the Ag nanoparticles were grafted onto the surface of carbon nanotubes (CNTs) to prepare hybrid nanocomposites.

其他文献

纤维增强陶瓷基复合材料单轴拉伸行为

纤维增强陶瓷基复合材料在拉伸载荷作用下，其应力-应变曲线会出现明显的非线性行为，基体开裂、纤维/基体界面脱粘和纤维断裂等损伤机制是其出现非线性的主要原因.采用细观力学方法建立了预测纤维增强陶瓷基复合材料拉伸应力-应变曲线的模型.采用剪滞模型描述复合材料出现损伤后的细观应力场，通过损伤模型确定拉伸载荷下细观损伤参量的演化，将剪滞模型与损伤模型相结合，预测了纤维增强陶瓷基复合材料单轴拉伸应力-应变曲线

会议

陶瓷基复合材料拉伸基体开裂界面脱粘纤维断裂

宽温区使用高含量磁性复合材料的制备与性能

聚合物基软磁性复合材料以其耐热性能好、耐腐蚀、韧性好、易加工和相对密度低等优点而被广泛应用于电子技术、通讯、汽车、航天航空等诸多领域。本文采用环氧树脂WSR-615和AG-80为基体，以Fe-Si磁性颗粒为填料，通过热压成型方法制备了高含量软磁性树脂基复合材料，并对复合材料的热性能、力学性能和磁性能进行了研究。

会议

环氧树脂Fe-Si颗粒宽温区力学性能磁学性能

Tensile Properties and Aging Behaviors of 6061Aluminum Alloy Composites Reinforced with In-situ MgAI

In-situ generated MgAl2O4 nanowhiskers reinforced 6061 aluminum (Al) alloy composites have been successfudly synthesized by reaction hot pressing under a relatively low temperature (600 ℃).

会议

metal matrix composites (MMCs)MgAl204 nanowhiskerin-situ synthesishot extrusi

单轴力多约束条件下复合材料单向加筋壁板结构效率分析方法的研究

通过建立复合材料单向加筋壁板单元的基本力学假设和计算分析模型，提出了一种综合分析其结构力学性能和多约束条件下进行快速优化分析的方法，并利用该方法对典型的复合材料单向加筋壁板结构进行了结构效率分析和优化，得到了其结构效率随各设计参数的变化趋势和相对最优结构参数，为复合材料单向加筋板的设计提供直接参考。本文方法综合考虑筋条总体稳定性、局部稳定性、结构静强度约束及其之间相互影响，并在基本假设的基础上将复

会议

复合材料结构优化单向加筋壁板结构效率总体稳定性

ULTRASONIC WELD BETWEEN AMORPHOUS AND CRYSTALLINE POLYMER WITH INSERITING INTERPOSED MATERIAL

Ultrasonic welds between crystalline and anmorphous polymers of PMMA-PLA and PMMA-POM are carried out,especially for the immiscible materials pair of PMMA-POM.Both of the effects of welding conditions

会议

Crystalline polymerAmorphous polymerUltrasonic weld

Microwave Tunable Properties of Polymer Composites Containing Ferromagnetic Microwires

In the context of developing multi-functional composites [1],our efforts have been devoted in exploring ideal functional fillers that could meet the criteria: (i) a likely omnipotent functional filler

会议

Improvement of the CNT Twisted Yarn Using Cardo Epoxy Resin

CNT yarn is made from CNT bundles.But it is so low in tensile strength for the weak Van der Waals force of CNT each other.Therefore we aimed at the strength improvement of CNT yarn by impregnation of

会议

Carbon nanotube spun yarnCardo structureWeibull distributionBonding energy

Nanoscale Mass Sensor Based on the Vibration of Carbon Nanotube - Theoretical analysis of vibration

Carbon nanotubes (CNTs) are nanomaterials with extremely favorable mass sensor properties.In this paper,we proposed that CNTs under the clamped boundary condition and an axial tensile load were consid

会议

NanotubesSensorVibrationSimulation

Mechanical Properties of Untwisted Carbon Nanotube Yarn with Densification Treatment

CNT yarn is expected to be a good method for utilization of CNTs which have extremely high mechanical properties.In this study,we fabricate untwisted CNT yarn by drawing CNTs from vertically aligned C

会议

Untwisted CNT yarnPolymer treatmentTensile properties Unidirectional composite

Innovation of Polymer Based Functionally Graded Materials (FGMs)

Functionally graded multiwaIled carbon nanotube (MWCNT) reinforced epoxy matrix composites (FGMs) were innovated by using the centrifugal method;the aggregation of MWCNTs that occurred during the epox

会议

Functionally graded materials (FGMs)microwave absorptionCarbon nanotubegraded

Carbon Nanotube Decorated with Silver Nanoparticles and its electromagnetic Wave Absorption Properti

其他学术论文