【摘 要】
：
The purpose of the work presented in this paper is to show cost effective and industrial solutions for the tuning of boron emitters, surface preparation and passivation of n-Pasha solar cells.The n-Pa
【机 构】
：
ECN Solar Energy, The Netherlands Levitech BV, Th
【出 处】
：
SNEC 第八届(2014)国际太阳能产业及光伏工程(上海)论坛
论文部分内容阅读
The purpose of the work presented in this paper is to show cost effective and industrial solutions for the tuning of boron emitters, surface preparation and passivation of n-Pasha solar cells.The n-Pasha cells now reach average efficiencies of 20.4%, with op efficiencies of 20.5%.One of the main limiting factors for n-Pasha cells currently is the boron emitter and its passivation [1].We present a simple and effective method to tune the emitter profile such that the recombination is decreased while the sheet conductance and contact ability is largely unaffected.The boron emitter profile is tuned using a new method of etching the surface by 10-20 nm, resulting in a boron emitter without boron depletion at the surface.The emitter recombination current J0E is decreased from 100 fA/cm2 to 60 fA/cm2 while maintaining the sheet resistance at 60 ohm/sq.n-Pasha cells made with these profiles exhibit a higher Voc by 6 mV and a higher efficiency by 0.2% absolute.
其他文献
中阶梯光栅光谱仪是采用交叉色散技术获得高级次谱实现全谱闪耀的高衍射效率光谱仪,交叉色散设计和二维谱图的识读是决定其性能的关键.所以对中阶梯光栅光谱仪的校准主要应从交叉色散技术和谱图识别的两个方面进行.中阶梯光栅光谱仪的最终数据输出是二维谱图,二维谱图的形成综合了中阶梯光栅、交叉棱镜等参数之间的关系,并包含了二维谱图处理和识别技术.
Year after year PV manufacturers increase the power output of their cells or modules while reducing their manufacturing costs, thereby lowering the cost per watt.More recently,competition has forced m
We investigate the performance of mass production tools for Passivated Emitter and Rear Cell (PERC) applications.We produce monocrystalline silicon p-type solar cells applying the PERC baseline proces
Industrial ion implantation with Intevac ENERGiTM ion implant tool provides a major processing advantage and cost reduction.Currently, Intevacs ENERGi ion implant system has processed millions of wafe
Recently various companies have introduced half-cell modules, showing a power increase of up to 3-4 % compared to full-size solar cell modules, which relates to power gain of 7.5W-10 W compared to a f
The back junction back contact cell, and more specifically the interdigitated back contact (IBC) cell is among the most appropriate cell designs to achieve highly efficient solar cells.
For cost reduction as well as reduction of environmental footprint of solar cells, it is important to reduce the use of silver (Ag) in metallisation.In this work we report on large reduction of Ag con
In this paper, we present the InPERC technology implemented into a multicrystalline silicon (mc-Si) solar cell production of a major Chinese cell manufacturer.Stable average efficiencies over 18% were
To help photovoltaic energy gain a larger share in the worlds total energy mix it is essential to further reduce the cost of solar generated energy and in parallel to enable mass production at a scale
In the highly competitive photovoltaics market, manufacturers of solar cells and modules are under constant pressure to reduce the manufacturing costs.Next to the silicon wafer the main cost driver of