TIO2/N-GRAPHENE NANOCOMPOSITE VIA IN-SITU HYDROTHERMAL SOL-GEL STRATEGY FOR VISIBLE LIGHT PHOTODEGRA

来源 :10th IUPAC International Conference on Novel Materials and t | 被引量 : 0次 | 上传用户：wb_0622

【摘要】

：

The current environmental problems from organic emission,including air,water,soil pollutions and so forth,have attracted much more attention.Visible light photodegradation under solar irradiation has

【作者】

：

YINGLIANG LIU RUIJUAN LU SHENGANG XU SHAOKUICAO

【机构】

：

School of Materials Science and Engineering,Zhengzhou University,Zhengzhou 450001,China

【出处】

：

10th IUPAC International Conference on Novel Materials and t

【发表日期】

：

2014年3期

【关键词】

：

photodegradation nanocomposite visible light graphene titania

下载到本地 , 更方便阅读

下载此文赞助VIP

声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架

论文部分内容阅读

The current environmental problems from organic emission,including air,water,soil pollutions and so forth,have attracted much more attention.Visible light photodegradation under solar irradiation has a very important significance in achieving a healthy living environment.Accordingly,the photocatalyst preparation and the improvement of photocatalytic efficiency for visible light photodegradation become the important issues.

其他文献

INFLUENCE OF SURFACE MODIFICATION ON THE MICROSTRUCTURE AND ELECTROACTIVITY OF REDUCED GRAPHENE OXID

Graphene is widely explored to replace conventional catalysts or as supporting material s for improving the performance of catalysts.Especially,graphene oxide(GO)treated with some functional groups or

会议

reduced graphene oxideplatinummodificationcatalystselectroactivity

ANTIBACTERIAL PROPERTIES OF POLYETHYLENE BY REACTIVE EXTRUSION WITH PHOSPHONIUM CHLORIDE

An antibacterial plastic was prepared with the quaternary phosphonium salts grafted low density polyethylene by reactive extrusion.The tributyl-3-[(and 4-)vinyl benzyl] phosphonium chloride was synthe

会议

antibacterialpolyethylenereactive extrusionmechanicalquaternary phosphonium

SYNTHESIS AND CHARACTERIZATION OF THE FULLY FUNCTIONALIZED PHOTOREFRACTIVE POLYMERS VIA RING-OPENING

Fully functionalized photorefractive polymers have attracted much attention in recent years.While the synthesis of chromophore-containing functionalized monomers is not a trivial task,and the polymeri

会议

photorefractivemethine chromophorenorborneneROMP

EFFECT OF THERMAL CONDUCTIVITY ON THE COOLING PROCESS OF FUSED ZIRCONIA CORUNDUM BRICK

In order to improve the shrinkage defects of fused zirconia corundum brick(AZS),reduce production costs,and optimize the production process,we use Any-casting software to simulate the brick filling an

会议

Fused zirconia corundum brickThermal conductivitySolidification fractionSolid

EFFECTS OF THE COEFFICIENT OF INTERFACIAL HEAT TRANSFER BETWEEN RISER AND MOLD ON THE COOLING PROCES

In order to optimize the manufacturing process of fused AZS material,the cooling process of fused AZS material was simulated by using Anycasting software,using the finite element simulation method.The

会议

Fused AZS materialInterfacial heat transfer coefficientSolidification sequence

TRIBOLOGICAL MECHANISM IMPROVING THE WEAR RESISTANCE OF PU/EP IPN VIA NANODIAMOND HYBRIDIZATION

Nanodiamond(ND)is deemed as potential nanoadditive in polymeric materials due to its commercial availability and relative low cost.With the aim to apply PU as wear resistance materials,PU/EP IPN nanoc

会议

NanodiamondPU/EP IPNTribological mechanism

MICROSTRUCTURE AND PHASE CONSTITUTION OF MO-SI-AL SYSTEM DURING SELF-PROPAGATING HIGH-TEMPERATURE SY

In this work,a series of samples of Mo(Si1-xAlx)2(X =0,0.1,0.20,0.30,0.40,0.50,0.60,0.70,0.80,0.90)were prepared by self-propagating high-temperature synthesis(SHS).The microstructure and phase consti

会议

Mo(SiAl)2Al4Mo3Si2Al8Mo3SHS

STUDY ON IN-SITU PREPARATION OF WSI2 AND MOSI2 COMPOSITE BY SELF-PROPAGATING HIGH-TEMPERATURE SYNTHE

An experimental study on the in-siru preparation of MoSi2 and WSi2 composite was conducted by self-propagating high-temperature synthesis(SHS)with powder mixture of(Mo1-xWx)Si2(X=0.10,0.20,0.30,0.40).

会议

WSi2MoSi2SHSIn-situCurve fitting

FACILITATING THE PHASE TRANSFORMATIONS OF BORON NITRIDE NANOPARTICLES AT MILD CONDITIONS BY SOLVOTHE

Generally,pressure(＞11-12 Gpa)and temperature(～2000 ℃)are required to achieve the formation of wurtzite and cubic boron nitride(wBN and cBN)from hexagonal boron nitride(hBN).For preparing sp3-bonded b

会议

sp3-bonded boron nitridenanoparticlessolvothermal hot-press

CHARACTERIZATION AND ELECTROCHEMICAL PROPERTIES OF MESOPOROUS CARBON PREPARED THROUGH HALLOYSITE AS

Mesoporous carbon(MC)materials have been prepared by a template-like method using polypyrrole(PPy)as source of carbon and inexpensive halloysite nanotubes(HNTs)as pore forming agents.The texture/struc

会议

mesoporous carbonhalloysiteelectrochemical capacity

TIO2/N-GRAPHENE NANOCOMPOSITE VIA IN-SITU HYDROTHERMAL SOL-GEL STRATEGY FOR VISIBLE LIGHT PHOTODEGRA

其他学术论文