论文部分内容阅读
钢铁前沿科技的思考
【机 构】
：
中国金属学会
【出 处】
：
2016年全国炼钢-连铸生产技术会
【发表日期】
：
2016年9期
其他文献
设计并制作了比例为1∶10 的浅埋偏压小净距隧道物理试验模型，并开展了大型振动台试验，研究了地震波类型及加速度峰值对浅埋偏压小净距隧道衬砌应变响应的影响.研究结果表
An overview is presented of research on the interactions between micro-organisms and mineral building materials(concrete and natural stone),performed at the
According to the preferred109selection of the raw materials and the optimization of the mix proportioning,low viscosity C80-C100 high-and ultra-high-perform
The Influence of Corrosion Inhibitors on the Stern-Geary Constant in Simulated Cement Pore Solutions
Corrosion of reinforcing steel in concrete structures is a major durability issue worldwide.For monitoring and diagnosis,non-destructive test methods have b
The contribution starts with the theoretical and experimental background of the micro-ice-lens model.It summarises: 1)The surface physical aspects of a)non-
Several properties of self-consolidating concrete(SCC)are affected by the thixotropic behavior of the material,including segregation resistance,lateral pres
Chemical admixture is very useful for higher performance of concrete and production of high fluidity concrete and high strength concrete etc..In addtion,che
钢厂属于流程制造业.本文通过对钢厂制造流程的内在特征的分析，阐述了对智能化钢厂的认识，指出流程型智能制造的物理系统要以动态-有序、协同-连续运行为导向优化流程结构，
With the increased levels of interground limestone being used in certain types of cements,as well as the use of limestone fillers in concrete placed in sulf
Tricalcium silicate(C3S)solid solutions known as alites are the principle phase of clinker,responsible for strength development.C3S exhibits a complex polym