Butanol production by a Clostridium beijerinckii mutant with high ferulic acid tolerance

来源 :中国生物工程学会第六次全国会员代表大会暨第九届学术年会 | 被引量 : 0次 | 上传用户:yinleish
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  A mutant strain of Clostridium beijerinckii,with high tolerance to ferulic acid,was generated using atmospheric pressure glow discharge and high-throughput screening of C.beijerinckii NCIMB 8052.The mutant strain M11 produced 7.24 g/L of butanol when grown in P2 medium containing 30 g/L of glucose and 0.5 g/L of ferulic acid,which is comparable to the production from non-ferulic acid cultures(8.11 g/L of butanol).When 0.8 g/L of ferulic acid was introduced into the P2 medium,C.beijerinckii M11 grew well and produced 4.91 g/L of butanol.Both cell growth and butanol production of C.beijerinckii M11 were seriously inhibited when 0.9 g/L of ferulic acid was added into the P2 medium.Furthermore,C.beijerinckii M11 could produce 6.13 g/L of butanol using non-detoxified hemicellulosic hydrolysate from diluted sulphuric acid-treated corn fibre(SAHHC)as the carbon source.These results demonstrate that C.beijerinckii M11 has a high ferulic acid tolerance and is able to use non-detoxified SAHHC for butanol production.
其他文献
  以―物流服务提供商—集成商—顾客‖与―物流服务提供商—顾客‖构成的物流服务双渠道为研究对象,构建了以提供商为领导者,集成商为追随者的Stackelberg 博弈模型。在渠道
会议
  为防止方柱钝体尾流部产生的涡街脱落易引发结构振动,进而使结构破坏,采用Fluent 中的LES方法了解漩涡脱落规律,进而优化结构。为全面分析钝体绕流流动特性,利用CFD 中的
会议
学位
  基于将表面织构技术应用于刀具表面可以有效改善刀具切削性能,结合拉刀自身的特点,提出一种微织构拉刀的加工方法。利用激光加工技术在拉刀后刀面加工出一种微织构,并研
  以小型汽油机为实验对象,进行不同转速下凸轮摇臂载荷实验,研究了不同转速下凸轮摇臂载荷峰值出现位置。结果表明低转速下,载荷峰值出现在凸轮最大升程点上;在高速运转时,峰值
中国是橄榄的原产地,有着2000多年的栽培历史。在长期的人工驯化、栽培生产过程中,产生了大量优良品种,但是由于不同地域间相互引种和杂交,并且缺乏系统的研究整理,导致许多
  针对振动切削技术在带锯床行业的应用,首先设计研制出一种集振动调频与负载检测为一体的振动加工用工件微激振装置。然后将该装置应用于金属带锯床,对其进行振动锯切实验研
  Matrine is an alkaloid extracted from Sophora flavescens Ait and has been found to exhibit many biological activities,such as anti-inflammation,antitumor,an
会议
  自动进给型砂轮切割机对金属切削加工的过程,实质可以看作是大量具有微刃的单颗磨粒不断切削工件的过程。因此与研究刀具切削和磨削类似,可通过分析加工过程中的切削工艺参
会议
  在自行设计的某实验研究用的多引射切圆预混燃烧器基础上,利用FLUENT 软件对该燃烧器的引射器的喷嘴入口长度参数进行优化,优化精度为1 mm,优化时综合考虑引射器的引射系
会议