论文部分内容阅读
采用碳纤维复合材料制作汽车部件，己成功应用在国外量产汽车上。碳纤维复合材料部件，对汽车轻量化技术应用研究具有较大的应用价值。本文主要研究以车顶盖为代表的汽车外覆盖件，采用碳纤维/玻璃纤维混杂增强复合材料的方式，进行轻量化技术研究。
碳/玻纤维增强塑料车顶盖制造技术应用研究
【摘 要】
：
采用碳纤维复合材料制作汽车部件，己成功应用在国外量产汽车上。碳纤维复合材料部件，对汽车轻量化技术应用研究具有较大的应用价值。本文主要研究以车顶盖为代表的汽车外覆盖件，采用碳纤维/玻璃纤维混杂增强复合材料的方式，进行轻量化技术研究。
【机 构】
：
北汽股份汽车研究院 北京中材汽车复合材料有限公司
【出 处】
：
第二届中国国际复合材料科技大会 (CCCM-2)
【发表日期】
：
2015年7期
其他文献
Application of sectional wind turbine blade is an effective access to conquer restraint of transporting and manufacturing of long blade.This paper reviewed fundamental research and it application rela
Study on permeability of fiber reinforcements in vacuum infusion process by experiment and numerical
In this paper, the compressibility of the fabric preform, the in-plane permeability and the thickness direction (Z direction) permeability in vacuum infusion process (VIMP) were determined by experime
With the increasing size of wind turbine blades, the need for more sophisticated load control techniques has induced the interest for aerodynamic control systems with build-in intelligence on the blad
The investigation on axially residual deformation of filament wound pressure vessels has a great significance for improving the dimensional stability of the produced vessels and satisfying the pressur
In this paper, we prepared a composite automotive drive shaft by optimizing the structure of drive shaft, combining the finite element analysis and proper processing.Furthermore, we characterized the
Thermal Performance and Diversity of Ultra-thin and Lightweight Envelope and Thick and Heavy Envelop
Multiple advantages of phase change material (PCM) make it may be one reasonable choice for enhancing building envelope thermal performance and meeting the purposes that reducing building cooling and
A new method to evaluate dynamic heat transfer characteristics of PCM walls based on numerical analy
The application of PCMs in buildings can obviously reduce building energy consumption and meet human comfort demands simultaneously.It is important to choose proper phase change materials in architect
会议
Properties of basalt textile and short steel fiber reinforced alkali activated slag panels after exp
Reinforcement of both textile and short fibers is a high efficiency and novel strengthening technique, which can greatly improve the flexural behavior and the toughness of the matrix.This paper presen
Portland cement (PC) concrete suffers from the attack of the salty and severe environment in ocean engineering.Alkali-activated slag (AAS) is one of the potential substitutes for PC as binder material
Influence of nano-TiO2 and metakaolin on the micro-structure and shrinkage performance of alkali act
High drying shrinkage is one of the key characteristics that restrict the application of alkali activated slag (AAS) in civil engineering.It is found that the high volume of pores between 1.25nm and 2