基于三维光学扫描的大型壁板精准校形技术研究

来源 :中国计算力学大会2018暨国际华人计算力学大会2018 | 被引量 : 0次 | 上传用户：hxyxy303

【摘要】

：

本文针对当前运载火箭网格加筋壁板校形工艺难以满足精度要求的难题，提出一种基于三维光学扫描的精准校形技术.该技术针对三维光学扫描获得的真实变形壁板的形貌偏差点云数据开展了数据分析，分解出了产品的缺陷模式及相应大小.分析结果表明滚弯成型的曲面壁板经历机铣后主要的变形模式为曲率偏差，在较大筋高壁厚比下，壁板的曲率变化达12.7％.

【作者】

：

蒋亮亮胡正根黄蔚王桂娇乐晨

【机构】

：

北京宇航系统工程研究所,北京,100076

【出处】

：

中国计算力学大会2018暨国际华人计算力学大会2018

【发表日期】

：

2018年10期

【关键词】

：

三维扫描缺陷模式曲率校形

下载到本地 , 更方便阅读

下载此文赞助VIP

声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架

论文部分内容阅读

其他文献

三维有序大孔TiO2基催化剂的制备、表征及光催化还原CO2性能

光催化还原二氧化碳为太阳能燃料使解决能源危机和环境污染的一种可持续手段。我们采用一步水热合成法制成了三维有序大孔(3DOM)TiO2 负载MoS2 光催化材料。

会议

三维有序大孔光催化还原CO2异质结光吸收

二氧化碳选择性还原与过渡金属催化材料理性设计

化石燃料燃烧产生的二氧化碳(CO2)被认为是造成全球变暖的主要原因。从大气中捕获CO2分子，进而通过高效的选择性化学转化对其进行资源化利用，将是未来降低大气中二氧化碳含量的有效途径之一。

会议

密度泛函理论全局结构优化理论催化

宽光谱响应分级结构TiO2/MnO2吸附-光催化降解有机污染物

随着社会发展和国民经济快速增长，环境污染问题日益严重，尤其是水污染。我国水资源严重匮乏，水污染不仅加剧了水资源短缺的现状，更是对人们的生活健康带来了严重的危害。

会议

分级结构二氧化钛二氧化锰吸附-光催化协同作用有机污染物

A Moving Morphable Void(MMV)-based explicit approach for topology optimization considering stress co

Topology optimization considering stress constraints has received ever-increasing attention in recent years for both of its academic challenges and great potential in real-world engineering applicatio

会议

Topology optimizationShape optimizationMoving Morphable Void (MMV)Stress cons

Simulation of the Cold Spraying High-velocity Impact Process

As a coating technique as well as a promising additive manufacturing technique,the cold spray has received much attention owing to its outstanding properties.Micron particles are sprayed with high vel

会议

Cold SrapyHigh-velocity ImpactMaterial Point MethodMicron Particle

Integrated Modelling of Microstructural Evolutions in Friction Stir Welding/Friction Stir Additive M

Friction stir welding(FSW)has been invented for more than twenty years.Based on friction stir welding,new technologies are further developed,including friction stir spot welding(FSSW),friction stir ad

会议

friction stir weldingfriction stir additive manufacturingMonte Carlo methodpr

Residual State Simulation in Laser Deposited Additive Manufacturing

A transient coupled thermo-mechanical model with laser heat source is used to simulate temperature history,thermal stress and residual state of Ti-6Al-4V component in laser deposited additive manufact

会议

laser additive manufacturingresidual statedamage

Phase field modeling of solidification in laser additive manufacturing

The traditional finite element heat transfer model is combined with phase field model to simulate the thermal histories and microstructure of Ti-Nb alloy during the multilayer laser power deposition.G

会议

finite element heat transfer modelphase fielddendrite spacing

Two scale modelling of microstructural evolution in friction stir additive manufacturing

Friction Stir Additive Manufacturing(FSAM)is new developed additive manufacturing technology based on the friction stir welding.It can be used for additive manufacturing of titanium alloy.

会议

Friction stir additive manufacturingPhase transformationMonte Carlo methodGra

Simulation Analysis of Thermal Stress in Selective Laser Melting for 3D Printing

Selective laser melting(SLM)is one of the mainstream technologies for 3D printing.It is a rapid prototyping technology by forming a three-dimension solid,through melting,solidifying and piling up the

会议

3D printingSLMnumerical simulationthermal-stress fieldresidual stress

基于三维光学扫描的大型壁板精准校形技术研究

其他学术论文