论文部分内容阅读
The microstructure and thermal properties of Si-implanted Sb2Te3 were investigated.Crystalline Si-implanted Sb2Te3 film with relatively uniform composition depth profile was fabricated which consists of Si4-x (0
其他文献
Fe2O3 Nanoparticles Wrapped in Multi-walled Carbon Nanotubes With Enhanced Lithium Storage Capabilit
As an anode material for Li-ion battery, Fe2O3 has the advantages of high theoretical capacity and low-cost.However, Fe2O3 often suffers from rapid capacity fading due to the volume expansion effect a
Ionic liquids (ILs) are organic salts which exhibit low melting temperature.One of the most important properties is negligible vapor pressure.Actually,the physicochemical properties of ILs can be tune
A series of magnetically recoverable nanocomposite photocatalyst was obtained by introducing hybrid oxide TiO2-FexOy onto the surface of Attapulgite (a kind of natural clay) via in-situ deposit techni
TiO2 has been widely used to photodegradate many pollutants as a result of relatively high catalytic activity, physical and chemical stability, avirulence and cheapness.However, due to the wide band g
Solid electrolyte interphase (SEI) is known as an electronic insulating but ionic conducting film formed on the surface of the electrodes in Li-ion batteries (LIB).It is widely accepted that the physi
Facet-Dependent Catalytic Activity of Platinum Nanocrystals for Triiodide Reduction in Dye-Sensitize
Platinum (Pt) nanocrystals have demonstrated to be an effective catalyst in many heterogeneous catalytic processes.However, pioneer facets with highest activity have been reported differently for vari
Controlling Adsorption Structure of Dye on Nanocrystalline TiO2 Films for Improved Photovoltaic Perf
Dye adsorption configuration on TiO2 surface is a key factor in dye-sensitized solar cells (DSSC).We find that adsorption structure of dyes on nanoerystalline TiO2 can be manipulated.Switch of binding
In the present investigation, the composite powder with 20 wt% particulate B4C and 80 wt% nanocrystalline 5083 Al was fabricated using mechanically milling at cryogenic temperature (cryomilling).After
Nickel-based mesoporous carbon catalysts are of great importance due to their unique catalytic and electrocatalytic properties.However, conventional multistep synthesis of heterogeneous nickel catalys
Polycrystalline samples of Ca9Co9M3O28 (M=Mn, Fe, Ni, Cu) have been synthesized through a simple citrate-gel method.The temperature dependence of the electrical resistivity has been carefully examined