【摘 要】
：
The electrochemical oxidation of sulfur dioxide is of practical interest due to its potential applications involved in flue gas desulfurization[1],water splitting for hydrogen production[2],and electr
【机 构】
：
Fuel Cell System and Engineering Laboratory,Dalian Institute of Chemical Physics,Chinese Academy of
【出 处】
：
第十五届全国氢能会议暨第7届两岸三地氢能研讨会
论文部分内容阅读
The electrochemical oxidation of sulfur dioxide is of practical interest due to its potential applications involved in flue gas desulfurization[1],water splitting for hydrogen production[2],and electrochemical sensing of sulfur oxides[3].Most research work has been done using pure metal,such as platinum and gold catalysts[4,5].This work reports on thecomparative electrochemical oxidation of sulfur dioxide by Pt3Pd/C,PtRu/C and Pt/C using cyclic voltammetry(CV)and rotating ring electrode(RDE).
其他文献
双金属纳米材料由于其独特的光学、电学、化学性质以及各种潜在的应用价值,是现今的一大研究热点[1-5].实现贵金属纳米晶形貌及结构可控,改善粒子分散性和稳定性已成为十分有价值的研究课题,不断发展和明确双金属纳米晶的合成方法和反应机理,是目前的一大挑战.聚烯丙基胺盐酸盐(PAH)由于其较大分子量、优秀的亲水性以及自身静电排斥作用,能够有效作为表面活性剂来制备不同形貌的纳米材料,并使纳米材料体系具有较高
Direct methanol fuel cell (DMFC) is a positive researching technique because of the high specific energy,environmentally friendly and convenient manipulation.However,there are two main obstacles inclu
To achieve high electrocatalysis,it is prerequisite to obtain small nanoparticle in the composite structure.Herein,we adopted Pi-Pi stacking between aniline and carbon nanotube(CNT)to realize their no
采用脉冲微波辅助化学还原法在不同的pH条件(pH=8,9,10,11,12)下合成钴-聚吡咯-碳(Co-PPy-C)载PtNi合金催化剂,其中合金总质量占20％,Pt与Ni原子比为3：1,分别记为(8)、(9)、(10)、(11)和(12)。利用透射电镜(TEM)、光电子射线能谱分析(XPS)和X射线衍射(XRD)研究了催化剂的结构,用循环伏安(CV)、线性扫描伏安(LSV)等方法考察了其电化学活
Electrocatalysts for oxygen reduction reaction (ORR) are an important component of renewable energy devices such as fuel cells and metal-air batteries.Currently,platinum (Pt) or its alloy has been wid
Fuel cellsare a type of such technology,and they enable efficient and cleanconversion of chemical energy in fuels directly into electrical powervia electrochemical means.Among the various types of fue
In the past four decades,non-precious metal catalysts (NPMCs) have been extensively studied as a low-cost catalyst alternative to Pt for the oxygen reduction reaction (ORR) in polymer electrolytemembr
Palladium has been the focus of recent research into Pt-alternative catalysts for the oxygen reduction reaction (ORR).In this manuscript,we developed a Pd catalyst supported on exfoliated montmorillon
Proton exchange membrane fuel cell is the most competitive candidate to replace traditional energy conversion devices for its high efficiency,environmental friendliness and wide applications.[1]Howeve
A number of mechanisms that contribute to the cathode catalyst degradation have been proposed,including Pt particle sintering,Pt dissolution/re-deposition,and carbon support corrosion [1-3].However,it