• 不 限
  • 期刊论文
  • 硕博论文
  • 会议论文
  • 报 纸
  • 英文论文
  2. 您的位置
  3. 首页
  4. 会议论文
  5. Impacts of Dam Regulated Discharge Scenarios on the Thermal Regime of the Lower Deadwood River in Ce

Impacts of Dam Regulated Discharge Scenarios on the Thermal Regime of the Lower Deadwood River in Ce

来源 :35th IAHR World Congress(第三十五届国际水利学大会) | 被引量 : 0次 | 上传用户：eworld5008
【摘 要】
：
Dam operations have altered the thermal regime of streams worldwide with adverse effects on fish habitat that force aquatic species to change their habitat.
【作 者】
：
Rohan Benjankar Daniele Tonina Andrew W.Tranmer Matthew G.Tiedemann Peter Goodwin 
【出 处】
：
35th IAHR World Congress(第三十五届国际水利学大会)
【发表日期】
：
2013年2期
【关键词】
：
Deadwood River hydrodynamic and temperature modeling dam release flow regime dam 
下载到本地 , 更方便阅读
下载此文 赞助VIP
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Dam operations have altered the thermal regime of streams worldwide with adverse effects on fish habitat that force aquatic species to change their habitat.
其他文献
CSP热轧带钢亮带原因及控制对策研究
针对热轧CSP生产过程中薄规格冷轧基料出现的亮带问题，通过大量的跟踪及测试，找到了亮带的特征和发生规律，并结合CSP 热轧生产过程的工艺特点及试验结果，从理论上分析了亮带产生的原因，并制定了亮带控制的对策，取得了较好的控制效果。
会议
热轧工艺CSP生产过程带钢亮带控制对策
Evaluation of Crown Performance of Vertical Stack MillsUsing Bi-directional Two-Stage Transport Matr
Crown and shape performance has been one of the most important technical and quality subjects focused by metal producers, mill designers, and rolling researchers. For past decades, many crown/shape co
会议
crownshapeL2 modelvertical stack mill4-hi mill6-hi milltransport matrix
EDT程序参数对毛化表面质量的影响
文章简述了电火花毛化的原理及目的， 通过大量的实验数据和前人的经验值分析了毛化程序中通电时间、放电电流、间隙电压等电参数之间的联系以及对轧辊表面质量(表面粗糙度Ra、峰值数Pc、及非对称性粗糙度Rsk)的影响，并初步建立了主要电参数与表面粗糙度之间的数学模型。这样，在从工艺数据库中提取加工参数的方法之外，有了新的方法来获得和优化毛化程序参数，从而有效预测和控制了毛化轧辊的表面形貌，提高了加工的效率
会议
电火花毛化轧辊表面粗糙度EDT程序参数优化
50 m/s in Cooling Bed to Enhance Profitability in Rebar Production
Achieving a very high production rate for the smaller-size range of bars products, in order to exploit reheating furnace capacity fully, has always been a common goal for bar producers worldwide. But
会议
Latest Generation Equipment, Processes and Technologies in Wire Rod Production. Opportunities Galore
@@ The large number of steel producers and the continuously progressing technology make the long products market day by day more competitive and selective.Today the conquest of a market niche can be a
会议
Latest Improvements to Increase Reliability And Productivity on Multi Slitting Processes Description
Slitting processes are used since years to increase the productivity of rolling mills, reducing at the same time the overall production costs. This technology is used mainly for the production of rein
会议
slitting technologyproductivitypass designguide system
二棒螺纹钢筋孔型与导卫系统系列优化
全文介绍了唐钢第二钢轧厂二棒生产线设计生产能力均为60 万吨/年，现都达到100 万吨/年以上。随着产量的增加、设备状态的不断老化，仍沿用最初设计的孔型及导卫系统，造成轧制过程中经常出现质量事故，处理以上事故会浪费大量的轧制时间，造成机时产量低、成材率指标差、车间成本提高。为全面系统地降低事故时间，提高轧机作业率，并进一步提高钢筋产品质量，针对各规格重点架次孔型及导卫系统进行改造。从实际应用效果看
会议
螺纹钢筋导卫系统孔型设计轧制过程技术改造
Application of 3D Numerical Model in Bedload Transport and Bed Morphology of River Channel Confluenc
A three-dimensional numerical model was applied to study the bed morphology and bedload transport of the junction of Ara and Kurau rivers in Perak in Malaysia.SSIIM2 a 3D k-3 turbulence CFD model with
会议
Bed load transport3D modelingRiver confluenceSSIIM
A Robust Gauss-Newton Algorithm and Its Application to the Calibration of Conceptual Rainfall-runoff
Parameter estimation remains an ongoing challenge in hydrological modeling for a number of reasons.One severe challenge is that of numerically rough and discontinuous objective function surfaces, whic
会议
Robust Gauss-Newton algorithmSCEModel calibrationSnow modelSIMHYD model
An Experimental and Numerical Investigation of the Mechanical Properties of Natural Marine Flocs Sub
Naturally formed marine flocs collected from the Atchafalaya Bay in the Gulf of Mexico were tested under nanocompression in a nano universal testing machine (Nano UTM) mounted with a specially designe
会议
Finite element modelingHyperelasticityMarine flocsMechanical propertiesNanoc