【摘 要】
：
The use of Robotic Total Station (RTS) for monitoring survey,slope,structure or dam monitoring is a common practice,because it provides continuous 24-hour remote data collection,analysis and warning a
【机 构】
：
1. School of Mining Engineering, Faculty of Engineering and the Built Environment, University of the
【出 处】
：
2012国际矿山测量学术论坛(proceedings of the joint international worksh
论文部分内容阅读
The use of Robotic Total Station (RTS) for monitoring survey,slope,structure or dam monitoring is a common practice,because it provides continuous 24-hour remote data collection,analysis and warning alarms toimmediately alert personnel with regard to stability problems.Since this operation requires the instrument to be left outside,namely at the mine site,construction site or dam site,both during the day and night,the instruments are usually sheltered in an observation house with wide window covered with glass material.This paper discusses total station monitoring survey and explores the likely effect of the distance between the total station and its observation house window on distance measurements.The result revealed that the distance between the total station and the observation window has no impact on the distance measurements.However,it is advisable to keep the distance at a practicalminimum,thus not above 0.5 m.
其他文献
To know the compression properties of ZKD super-high-water packing material in the specific underground environment,the theoretical model of calculating equivalent mining heights of both the single fi
Efficient exploitation of coal resources is an important part of the green mining system,so high-intensity mining technology,such as full-mechanized sublevel caving mining,has been widely used.Based o
Landsat imagery with a 30 m spatial resolution is well suited for characterizing mine-area-scale landscape structure and dynamics.While Landsat images have advantageous spatial and spectral characteri
This paper proposes a warning and integrity monitoring algorithm for coal mine shaft safety monitoring using the Global Positioning System (GPS) kinematic deformation monitoring time series.The Kalman
Solid waste backfilling mining can reduce the mining damages greatly and it is widely used in China,especially mining under buildings,water bodies and railways.Surface subsidence rediction is the foun
3D laser scanning is another technology revolution in acquiring the geographic data after GPS technology and terrestrial 3D laser scanner takes the advantages of high resolution and efficiency in acqu
Compression property of gangue is the basic data for designing subsidence control plan for gangue backfilling mining.Gangue is a kind of granular material and its graduation has a great influence on i
Based on mining internet of things current situation,the paper analysis wireless real-time positioning technology and UDP communication protocol,design four layers structure and network plan of mine G
The traditional way of deformation monitoring in mining area is to utilize the level,theodolite and total station.Though GPS is widely used,deformation monitoring in mining survey with GPS still have
Low-cost GPS/INS integration system is the idea positioning part of open-pit mine transport truck monitoring and dispatching system.However,the sensitivity of low-cost INS is not enough to finish the