【摘 要】
：
Although titanium(Ti)based medical devices have been used clinically for more than 30 years,there are still weaknesses for them that need to be resolved.The lacks of osteoconduction and osteointegrati
【机 构】
：
Institute of Metal Research,Chinese Academy of Science,Shenyang 110016,China
【出 处】
：
2015 Shanghai Thin Film Conference(2015上海薄膜国际会议)
论文部分内容阅读
Although titanium(Ti)based medical devices have been used clinically for more than 30 years,there are still weaknesses for them that need to be resolved.The lacks of osteoconduction and osteointegration in bones for long-term survival often occur and lead to failures of implantations [1].Therefore A challenge for Ti-based implants is incorporating the osteointegration,as well as an enhanced bioactivity for bone healing and regeneration,which will improve the implant-host interactions.Magnesium based metals have been increasingly studied in the past decade,owing to their biodegradability and multiple biological activities [2].It was found that magnesium could positively influence the bone tissue growth,and thus improve the bone healing and reconstruction [3].The biodegradable magnesium employed as coating can also be appropriate for medical implants,which is expected to promote drug-enhancing osteointegration and reduce implant infection compared with conventional metals and coatings used today.In this study,a bio-functional magnesium coating was fabricated on Ti6Al4V alloy by arc-ion plating,which was proved to have fine grain size and high coating/substrate adhesion in comparison with other PVD methods [4].Microstructure,morphology and composition of the magnesium coating were investigated by means of SEM,EDS and XRD.In vitro degradation and ions releasing were measured after immersion in simulated body fluid.Furthermore,animal implantation tests were conducted to evaluate the related cell attachment,viability and bone response in vivo.A uniform magnesium coating was successfully deposited on the surface of Ti6Al4V alloy.With increase of immersion time,magnesium ions were gradually released due to biodegradation.Both in vitro and in vivo experiments proved that the magnesium coated titanium alloy has a better biological activity on proliferation and differentiation of BMSCs.After implantation the magnesium coating could promote the new bone formation and had positive effects of osteoconductivity and osteogenesis,thus indicating its great potential for orthopedic applications.
其他文献
Germanium has been attracting a lot of interest due to its much higher electron and hole mobility than those in Si,and thus been considered as the most promising channel material for future MOSFET dev
Mobility boosters are imminently required for high performance and low power CMOS generations.Compressively strained silicon-germanium(sSiGe)channel,integrated into a Si/sSiGe/SOI quantum well(QW)MOSF
Germanium is one of the most promising candidates for the channel material of future CMOS devices,because of its high carrier mobility.However,a critical issue to realize high performance Ge CMOS devi
It has been theoretically predicted that 1.4%biaxial tensile strain can convert Ge,which is compatible with Si CMOS technology,into a direct band-gap semiconductor [1] and increase the carrier mobilit
Germanium is a promising candidate to replace silicon in nanoelectronics due to its significantly higher electron and hole mobilities than silicon.However,the unstable germanium oxide formed at the in
Germanium tin(GeSn)is a group Ⅳ alloy with high carder mobility and tunable energy bandgap [1].Theory predicts that the bandgap has a crossover between indirect and direct bandgap transition at around
Biosensors based on ion-sensitive field-effect transistor (ISFET) have demonstrated a lot of advantages such as small size,fast response time,label-free detection [1-2].However,the accuracy and sensit
The solid reactions between Nickel and relaxed SiGe substrate are systematic investigated with different Al interlayer thicknesses.The morphology,composition and sheet resistance of the germanosilicid
To lower the power consumption of nanometer devices new materials and novel device structures are required.High mobility channel materials are essential for the low power CMOS.For energy efficient dev
Hydroxyapatite nano-rods/fibers patterned oxides-based coatings were fabricated on titanium,zirconium,tantalum and magnesium,respectively,using a hybrid approach of microarc oxidation and hydrothermal