STUDY ON Nb MICROALLOYING IN HIGH CARBON PEARLITE STEELS FOR RAILS

来源 :第七届低合金高强度钢国际会议 | 被引量 : 0次 | 上传用户:carboy123
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  The results of experiments show that Nb can significantly lower phase transformation temperature and refined both lamellar space of pearlite and pearlite colony.The refinement on microstructure leads to improvement in steels mechanical properties.However,there is more ferrite formed on grain boundary because of a small amount of Nb addition.To add Cr together with Nb can effectively avoid the formation of ferrite on the grain boundary while microstructure is refined.The results are successfully applied into the development of rail steel U68CuCr which has much higher corrosion resistance as well as better mechanical properties in comparison to conventional rail steel U75V.
其他文献
The chemistry composition,process parameters and the test results of Q890D free boron high strength steel plate used for engineering machinery was studied.The 16~40 mm thickness steel plates with good
Niobium Bearing Low Carbon Low Alloy(LCLA)value-added S355 structural steels reduces the overall material and construction costs for many high strength construction steel and heavy equipment applicati
It is well known that the strengthening mechanisms of Nb Microalloying on low carbon flat products have been widely studied and recognized since Microalloying 75 in Washington,DC,but the application r
The combined addition of molybdenum and niobium is usually applied in fire-resistant steels with appropriate controlled rolling and controlled cooling.In order to develop new alloying strategy based o
Ferritic stainless steel is being paid attention by steel industry and downstream users relying on its good over-all properties and low cost.With improvement of metallurgical technology and researchin
The separate or combined addition of micro-alloying elements to the conventional weathering steel is usually applied in producing higher yield strength weathering steels.The target-oriented researches
For the purpose of reducing alloys additions and then its cost of conventionally combined Nb-V microalloyed Q460 grade steel plates for construction,a HSLA steel alloying design with only V-N microall
A high-performance Q370qE-HPS bridge steel with low carbon content(≤0.10wt%),Nb microalloying(0.025-0.050wt%)and low carbon equivalent(CEV)(≤0.38%)has been produced using TMCP procedure.The microstruc
This paper presents an actual case of a new industrial building at CBMMs plant in Araxá,Brazil as an example of lean design using microalloyed steels.The structure consists mostly of microalloyed ASTM
Recently,with the rapid upgrading of the equipment in the steel Corp,the rolling technology of TMCP has been rapidly developed and widely applied.A large amount of steel plate has been produced by usi