【摘 要】
：
Recently,ceramic membranes can be applied under extreme operating conditions such as low pH,high pressure and high temperature.Especially,the inherent limitations of conventional polymer membranes can
【机 构】
：
Engineering Ceramics Group,Korea Institute of Materials Science,Changwon,Gyeongnam 641-831,Republic
【出 处】
：
第七届国际分离科学与技术会议(Proceedings of the 7th International Conferen
论文部分内容阅读
Recently,ceramic membranes can be applied under extreme operating conditions such as low pH,high pressure and high temperature.Especially,the inherent limitations of conventional polymer membranes can be overcome by adopting ceramic membranes simply to the existing water treatment systems.Moreover,there are a lot of potential applications of ceramic membranes such as distillation,adsorption and extraction in various industrial areas.Therefore,the ceramic membrane technology is not a mere ceramic processing technology,but a highly influential technology to the overall environment technology.In this study,we focused that the cost-effective membrane manufacturing process by adopting various kinds of natural materials like diatomite or clays.These low-cost materials offer attractive mechanical resistance and can be used as a filter,filler,or a mild abrasive material due to its highly porous structure.Accordingly,a challenging area among the membrane applications of natural materials is how to consolidate them as a bulk structure that retains its unique,inherent properties or how to coat them properly on any suitable substrate.This presentation consists of three parts: (1) Tailoring pore structures of the substrate of ceramic membrane,(2) Functionalizing the coating layer of ceramic membrane,and (3) Extruding the substrate of ceramic membrane.Also,the aim of this study is to clarify whether natural materials such as diatomite and clays can be applied to water treatment area either as a substrate material or a coating material.
其他文献
Cross-linking has been regarded as an effective method to improve the selectivity of gas separation membrane.However,cross-linking also showed a tendency to decrease the gas permeance.In this study,cr
Integrally skinned polyetherimide(PEI)asymmetric membranes were prepared by the phase inversion process in which the casting solution contained dimethylacetamide (DMAc) as a solvent and PVP as a addit
Emission of gasoline vapor always existed in the petroleum transportation,processing and usage processes,which would cause serious environmental problems and resources loss [1].Membrane technology is
Compared with the conventional ceramic membrane fabricated from oxide particles,nanofiber membranes have the distinctive mesh structure and the nanofibers can divide large voids into smaller ones with
There has been significant interest in applying pervaporation for recovery phenol from wastewater [1].In this paper,poly(ether block amide) (PEBA 2533) symmetric membranes were prepared by dry phase v
As novel clean energy technologies,alkaline anion exchange membrane fuel cells (AAEMFCs) have been indicated to have high power density and reasonable energy density.They have the ability to offer fas
Associated gas flaring is one of the most challenging energy and environmental problems facing the world today.Approximately 150 billion cubic meters of natural gas are flared in the world each year,r
Hybrid processes combining a polymer membrane and photocatalyst have received continual worldwide research attention,but ceramic membranes with excellent performance have not been tested for this appl
In this study,porous hollow fiber membranes were prepared by dry process [1].Dry process consists of three steps; first extrusion,second annealing and finally stretching.We spun hollow fiber precursor
The gas separation membrane is operated in condition of high temperature and corrosiveness.So thermostable polymers were needed.One of the most thermostable polymers,the polyimide based on aromatic st