【摘 要】
：
Coaxial microfluidic devices were used to investigate the formation of acrylonitrile droplets and the dissolution of acrylonitrile during the droplet generation stage in a bio-hydration system.The ave
【机 构】
：
The State Key Lab of Chemical Engineering,Department of Chemical Engineering,Tsinghua University,Bei
【出 处】
：
The 14th International Conference on Microreactivity Technol
论文部分内容阅读
Coaxial microfluidic devices were used to investigate the formation of acrylonitrile droplets and the dissolution of acrylonitrile during the droplet generation stage in a bio-hydration system.The average mass transfer coefficient of acrylonitrile was obtained using an online visual measurement method.The average mass transfer coefficient of acrylonitrile in water increased from 3.91×10-3 to 11.80×10-3 m/s and the droplet size decreased from 85 to 55 μm when the flow rate of the continuous phase was increased from 40 to 200 μL/min.In contrast,the average mass transfer coefficients of acrylonitrile in a 900 U/mL free-cell solution ranged from 5.95 to 14.56 × 10-3 m/s under the same conditions,while the bio-reaction rarely affected the size of the generated droplet.In addition,the increase of the acrylamide concentration changed the flow pattern from the dripping regime to jetting and laminar regimes and significantly reduced the droplet size.
其他文献
The microfluid segment technology allows the realization of fast mixing processes and thus a very narrow residence time distribution.This enables optimum preconditions for a fast nanoparticle nucleati
Because of their great potential in nano-and biotechnology,polymeric nanoparticles such as polymersomes have attracted growing interest during the last decades.One possible application can be found in
Polyisobutylenes(PIBs),produced by the cationic polymerization of isobutylene(IB),have exhibited some distinguished properties [1-2] with respect to thermal stability,flexibility at ambient temperatur
Compared with typical gold nanoparticle(AuNP)synthesis routes which rely on aqueous reducing agents,reduction by carbon monoxide(CO)has various advantages such as no reducing agent left in the product
Microfluidic droplet-based systems represent a unique tool to study crystallization kinetics as they allow a precise temperature control,few impurities and the possibility to control fluid dynamics.Co
The growing understanding of the unique physical and chemical properties of the nanoparticles is constantly revealing novel applications from catalysis,drug delivery,sensors,energy storage,etc1.Despit
The stimulation-responsive microcapsules have considerable applications in drug delivery1,agricultural industries2 and medical technology3,4.They always united with the environment,taking advantage of
With the rapid development of microfabrication technology,more fabrication methods and applications of microchannel heat exchanger have been frequently reported in last two decade1-3,and those methods
Experimental study of mass transfer in water/ionic liquid(IL)microdroplet systems was carried out using micro-LIF(laser-induced fluorescence)measurement method,where [C4mim][PF6] was adopted as a repr
A pendant drop method was utilized to visually observe the mass transfer process of an acrylonitrile droplet in a bio-hydration system.First,the dissolution of acrylonitrile was observed in deionized