论文部分内容阅读
Numerical simulation based on the Euler equation and one-step reaction model is carried out to investigate the process of deflagration to detonation transition (DDT) occurring in a straight duct.The numerical method used includes a high resolution fifth-order weighted essentially non-oscillatory scheme for spatial discretization, coupled with a third order total variation diminishing Runge-Kutta time stepping method.In particular, effect of energy release on the DDT process is studied.The model parameters used are the heat release at q=50, 30, 25,20,15, 10 and 5, the specific heat ratio at 1.2, and the activation temperature at Ti=15, respectively.For all the cases, the initial energy in the spark is about the same compared to the detonation energy at the Chapman-Jouguet (C J) state.It is found from the simulation that the DDT occurrence strongly depends on the magnitude of the energy release.The run-up distance of DDT occurrence decreases with the increase of the energy release for q=50~20, and increases with the increase of the energy release for q=20~5.It is concluded from the simulations that the interaction of the shock wave and the flame front is the main reason for leading to DDT.